A matched memory upgrade for compatible ASUSTOR NAS systems
8 GB DDR4260-pin SO-DIMMAS-8GD4ASUSTOR NAS upgrade
The ASUSTOR AS-8GD4 is an 8 GB DDR4 memory module designed for compatible ASUSTOR NAS systems. Ordering code 92M11-S8D40 identifies the 260-pin SO-DIMM listed by ASUSTOR for its AS65, AS54, AS67 and FS67 series. It is a system upgrade component, supplied separately from the NAS.
Best For: Owners of a verified compatible ASUSTOR NAS who need the manufacturer-listed 8 GB memory module.
Before you order: Check the exact NAS model, installed memory, available slots and maximum supported capacity before ordering. Follow the model-specific ASUSTOR upgrade guide, shut down and disconnect power, and observe antistatic precautions. The module capacity is 8 GB; the final installed total depends on the existing configuration.
What's in the Box
- One ASUSTOR AS-8GD4 8 GB DDR4 SO-DIMM memory module.
- NAS chassis, storage drives and installation service are not included.
What It Means in Practice
- Add memory only within the slot and capacity limits of the exact NAS model.
- Additional memory can support a suitable workload when memory is the constraint; it does not increase CPU performance or drive capacity.
- Use the exact part number and the ASUSTOR compatibility guidance when planning the upgrade.
What Will Not Work
- The SO-DIMM form factor does not establish compatibility with every laptop, NAS or motherboard.
- Do not assume compatibility with ASUSTOR series not listed for this module.
- Speed, timings and voltage are not stated in the reviewed official listing and are not promised here.
Key Features
Manufacturer-listed upgrade
Exact ASUSTOR model AS-8GD4 and ordering code 92M11-S8D40.
8 GB module capacity
DDR4 memory in a compact 260-pin SO-DIMM form factor.
Defined NAS families
Officially listed for compatible AS65, AS54, AS67 and FS67 series systems.
Clear identification
EAN 4710474838295 helps distinguish the genuine ordering code from third-party replacements.
Technical Specifications
| Brand / model | ASUSTOR / AS-8GD4 |
| Manufacturer part number | 92M11-S8D40 |
| Module capacity | 8 GB |
| Memory type | DDR4 |
| Form factor | 260-pin SO-DIMM |
| Manufacturer-listed families | AS65 / AS54 / AS67 / FS67 series; verify exact model limits |
| EAN / UPC | 4710474838295 / 887372901308 |
| Published dimensions | 69.6 × 30 × 10 mm |
| Published module weight | 7 g |
| Condition | New |
Frequently Asked Questions
Is this a complete NAS?
No. It is a memory module for installation in a compatible NAS, which is sold separately.
Will any ASUSTOR NAS accept it?
No. ASUSTOR lists AS65, AS54, AS67 and FS67 families. Check the exact model, slot arrangement and supported maximum memory.
Does installing it add exactly 8 GB to my total?
Not necessarily. A module may replace an installed module. Final capacity depends on the original configuration and model limits.
Is the photographed appearance guaranteed?
ASUSTOR states that product images are illustrative and may change. Select by exact part number and specifications.
Singular Expert Insight
Treat a NAS memory upgrade as a model-specific compatibility decision. Confirm the existing configuration and maximum supported capacity first, then use the exact ordering code. A larger memory allowance helps only where the workload can use it; it does not replace a processor or storage upgrade.
Buyer’s Guide
✓ Buy it if Your exact NAS is compatible and needs this manufacturer-listed 8 GB module.
✕ Skip it if You need a complete NAS, universal laptop RAM or an unverified speed grade.
→ Also consider Exact NAS model, free slots, existing modules, supported capacity and safe installation.