AXIS T8611 SFP Module LC.LX 5801-801 Gigabit SFP Transceiver 1310 nm LC Single-Mode up to 10 km
Μάρκα:
AXIS
AXIS T8611 SFP Module LC.LX 5801-801 Gigabit SFP Transceiver 1310 nm LC Single-Mode up to 10 km
€173.41 inc. VAT
5801-801
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
AXIS T8611 SFP Module LC.LX — Single-Mode, 10 km
Gigabit1310 nm · LCSingle-mode 10 kmWide temperature
The AXIS T8611 SFP Module LC.LX (article 5801-801) is a Gigabit SFP transceiver for single-mode fibre, reaching up to 10 km at 1310 nm over an LC duplex connection. Axis states it is compatible with all Axis products with SFP slots, such as the AXIS T8516 PoE+ switch, Axis media converters and PTZ cameras with an SFP port, which makes it the fibre link for long camera runs and outdoor video systems. In practice, single-mode optics are the choice when a link leaves the building or runs several hundred metres: the OS2 fibre used by carriers and campus backbones carries the signal for kilometres with little loss. Before you order, confirm the fibre is single-mode at both ends and note the length and the number of patch panels on the way.
Compatibility — check before buying:
It needs single-mode fibre and an LX module at the far end — it will not work on multimode fibre. For multimode runs, order the AXIS T8612 SFP Module LC.SX, which looks the same. Axis publishes two temperature ranges: −40 to 85 °C in the data sheet and −40 to 65 °C on the product page; plan for the lower figure in hot outdoor cabinets. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your switch model and the cable run and we check it before you order.
Best For
✓ Long camera runs to outdoor PTZ cameras
✓ AXIS T8516 PoE+ switch uplinks
✓ Axis media converters
✓ Perimeter and site surveillance
✓ Outdoor cabinets with wide temperature swings
✓ Links up to 10 km on single-mode
Key Features
Built for outdoor video
Rated down to −40 °C, so it suits street and perimeter cabinets where commercial optics are not rated.
Failover-ready
A loss-of-signal output lets the host switch over to a backup link, such as an RJ-45 connection, if the fibre fails.
Single-mode fibre, long reach
Built for single-mode (OS1/OS2) fibre, the type used between buildings, floors and sites. It will not run over the orange or aqua multimode fibre found in many racks — the fibre type has to match at both ends.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
We use the T8611 for Axis camera links that run too far for copper — from the building to a pole-mounted PTZ, for example. Check the fibre type first: single-mode means T8611, multimode means T8612. Order one module for each end. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status from the switch and we help you find out whether it is the optic, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You connect Axis switches, media converters or SFP cameras over single-mode fibre up to 10 km.
Skip it if
Your fibre is multimode (T8612) or you need 10G.
Also consider
AXIS T8612 SFP Module LC.SX for multimode.
Χαρακτηριστικά
Product Code
B092648
EAN Code
7331021055704
Manufacturer
AXIS