BlueOptics J9151D-BO HPE Aruba J9151D Compatible SFP+ Transceiver 10GBASE-LR 1310 nm LC Single-Mode up to 10 km DDM
Μάρκα:
BlueOptics
BlueOptics J9151D-BO HPE Aruba J9151D Compatible SFP+ Transceiver 10GBASE-LR 1310 nm LC Single-Mode up to 10 km DDM
€64.09 inc. VAT
J9151D-BO
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
BlueOptics J9151D-BO — HPE J9151D Compatible 10G LR SFP+
10 Gbps10GBASE-LRHPE J9151D codedUp to 10 km
The BlueOptics J9151D-BO is a 10 Gbit SFP+ transceiver for single-mode fibre, reaching up to 10 km at 1310 nm over a duplex LC connection, with digital diagnostics. It is programmed with the coding of the HPE Aruba J9151D, so HPE Aruba switches that expect revision D identify it as that part. BlueOptics builds it on its BO35J13610D hardware and backs it with a 5-year functional warranty. In practice, single-mode optics are the choice when a link leaves the building or runs several hundred metres: the OS2 fibre used by carriers and campus backbones carries the signal for kilometres with little loss. Before you order, confirm the fibre is single-mode at both ends and note the length and the number of patch panels on the way.
Compatibility — check before buying:
It is coded as an HPE J9151D. HPE lists J9151D as end of support and states the Aruba CX 8325 accepts only J9151E or later — for that switch order the J9151E-BO. It needs single-mode fibre (OS1/OS2): the orange or aqua multimode fibre in many racks looks the same but will not carry this link. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your device model and the cable run and we check it before you order.
Best For
✓ HPE Aruba switches that expect J9151D
✓ Links between buildings up to 10 km
✓ Single-mode campus backbones
✓ Replacing a failed HPE J9151D module
✓ Spare optics at a lower cost than the original
✓ Networks that want a 5-year module warranty
Key Features
Coded as HPE J9151D
Programmed with the HPE Aruba J9151D coding, so the host treats it as the original part instead of an unsupported third-party optic.
Single-mode fibre, long reach
Built for single-mode (OS1/OS2) fibre, the type used between buildings, floors and sites. It will not run over the orange or aqua multimode fibre found in many racks — the fibre type has to match at both ends.
Monitoring you can read
Digital diagnostics (SFF-8472) let the host report temperature, laser power and received light, so a dirty connector or a failing link shows up before users call.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
We offer the J9151D-BO as a like-for-like replacement where switches already run J9151D optics. For new projects, and always for a CX 8325, the J9151E-BO is the better choice. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status and we help you find out whether it is the module, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You replace or add J9151D optics on HPE Aruba switches that accept revision D.
Skip it if
Your switch is an Aruba CX 8325, your fibre is multimode, or your switch is another brand.
Also consider
BlueOptics J9151E-BO, the current HPE revision.
Χαρακτηριστικά
Product Code
04:538561
EAN Code
4063232616810
Manufacturer
BlueOptics