Cisco Industrial Ethernet 1000 8-Port PoE+ DIN-Rail Switch, 2x Gigabit SFP Uplinks, 180W PoE, Web Managed, Fanless

The Cisco IE-1000-8P2S-LM is a compact, fanless industrial Ethernet switch for DIN-rail cabinets, with eight 10/100 copper ports delivering PoE/PoE+ (IEEE 802.3af/at) from a 180 W budget and two Gigabit SFP uplinks. It is designed for factory floors, roadside and utility cabinets and building automation, where IP cameras, wireless bridges and sensors need power and a rugged switch that survives -40 to 70 °C.

"LM" means lite managed: configuration is done through the built-in web Device Manager, with SNMP, VLANs and IGMP/DHCP snooping, rather than a full Cisco IOS command line. It is a good fit for OT teams that want Cisco hardware without needing a network engineer on site.

• Cisco IE-1000-8P2S-LM switch with integrated DIN-rail mount
• Power and alarm terminal connectors
• Not included: DIN-rail power supply, SFP modules, console cable and 19-inch rack kit (STK-RACK-DINRAIL=)

• Powers up to eight PoE or PoE+ devices directly from the cabinet — cameras, APs, card readers — within the 180 W total.
• The two Gigabit SFP uplinks take fibre modules, so the cabinet can sit hundreds of metres or kilometres from the control room.
• Dual DC inputs (DC-A / DC-B) give power-source redundancy: the switch draws from the higher input and fails over automatically.
• Fanless convection cooling — no moving parts to fail in dusty or vibrating locations.

• The copper ports are 10/100 Mbps, not Gigabit — fine for cameras and controllers, not for Gigabit clients.
• It will not run from mains AC directly; it needs a 48–54 V DC supply.
• It has no full IOS CLI or advanced Layer 3 routing — use an IE-3x00 for that.
• Hazardous-location (Class I Div 2, ATEX) use requires mounting in a suitable enclosure.