Conceptronic USB 3.2 Gen 2x2 USB-C to USB-C Cable, 20 Gbit/s, PD 100 W, 4K 60 Hz, E-Mark, Braided, 2 m, Black

The Conceptronic ETTA07B20 is a 2 m USB-C to USB-C cable with up to 20 Gbit/s (USB 3.2 Gen 2x2) data transfer and USB Power Delivery up to 100 W (20 V / 5 A) with e-marker chip, made for connecting USB-C laptops, phones, tablets and accessories directly to each other or to a USB-C charger.

At 20 Gbit/s the cable can feed a USB 3.2 Gen 2x2 SSD at around 2,000 MB/s — but only if both the computer port and the drive support Gen 2x2. Most laptops stop at 10 Gbit/s, in which case the cable runs at 10 Gbit/s.

USB-C cables look alike but differ in three ways: data speed (from 480 Mbit/s up to 40 Gbit/s), power (60 W, 100 W or 240 W) and video support. This one is 20 Gbit/s with USB Power Delivery up to 100 W (20 V / 5 A) with e-marker chip — check those two numbers against what your device needs.

• 1 × Conceptronic ETTA07B20 USB-C to USB-C cable, 2.0 m, braided

• Length 2 m: long enough to reach from a wall socket or a PC under the desk to a sofa, bed or desktop, so the device can be used while it charges.
• Power: USB Power Delivery up to 100 W (20 V / 5 A) with e-marker chip. The charger and the device negotiate the actual wattage; the cable only sets the upper limit.
• Video: up to 4K at 60 Hz over DisplayPort Alt Mode, if the laptop USB-C port outputs video and the monitor accepts USB-C input.
• Symmetrical: either end can go into the charger or the device.
• Plug-and-play: no driver needed on Windows, macOS, Linux, ChromeOS, Android or iPadOS.

• No 240 W (USB PD 3.1 EPR) charging — the cable tops out at 100 W, so 140 W+ gaming laptops will not get full power.
• Not a Thunderbolt 4/5 or USB4 cable — docks and eGPU enclosures that require Thunderbolt/USB4 will not work at full function.
• No 8K or high-refresh video is published — plan on 4K at 60 Hz.