Singular Selected
DIGITUS DA-70466 4K HDMI EDID Emulator
Keeps sources outputting the right resolution when a display is switched, turned off or sits behind an extender or matrix.
EDID emulator4K 60 HzHDCP 2.2 / 1.4No power supply
The DIGITUS DA-70466 is an in-line 4K HDMI EDID emulator that sits between an HDMI source and an extender, splitter, matrix switcher or display and presents a fixed, stable EDID to the source. Part number DA-70466 can use stored EDID presets or copy and save the EDID of a connected display, passes UHD 4K at 60 Hz with HDCP 2.2/1.4, needs no external power and shows its status on an LED.
Compatibility Note: An EDID emulator fixes handshake and resolution problems; it does not boost the signal. Set or learn the EDID for the display you actually use, so the source outputs a resolution every connected screen can show.
Technical Specifications
| Identification |
| Part Number |
DA-70466 |
| EAN / GTIN |
4016032442554 |
| MPN |
DA-70466 |
| Brand |
DIGITUS (ASSMANN Electronic) |
| Function |
| Type |
HDMI EDID emulator / cloner (1 × HDMI in, 1 × HDMI out) |
| EDID modes |
Stored EDID presets; copy and store the EDID of a connected display |
| Max resolution |
UHD 4K at 60 Hz |
| HDCP |
Pass-through, HDCP 2.2 and 1.4 compliant |
| Indicator |
LED |
| Physical |
| Power |
Not required |
| Dimensions |
44 × 20 × 13 mm |
| Weight |
15 g |
| In the box |
EDID emulator, manual |
Frequently Asked Questions
Why does my PC change resolution when the projector is switched off?
When a display disconnects, the source loses its EDID and falls back to a default mode. Placed in the HDMI line, the DA-70466 keeps presenting the stored EDID, so the PC or media player keeps its resolution and window layout.
Can the DA-70466 be used with an HDMI matrix or splitter?
Yes. It is designed for extenders, splitters and matrix switchers, where mixed displays or switching can confuse the source; it gives the source one consistent EDID to lock on to.
Singular Expert Insight
The DA-70466 is a small part that solves a lot of support calls in signage, conference rooms and control rooms: black screens after switching, wrong resolutions and HDCP handshake drops. It is passive and powered from the HDMI line, so it can be hidden behind a display.
✓ Buy it if you run HDMI through extenders, splitters or matrix switches and see resolution or handshake problems.
✕ Skip it if you have a simple direct source-to-display cable that already works reliably.
→ Also consider An HDMI splitter with built-in EDID management if you are also adding outputs.