DIGITUS 2U 19" Blank Panel with Ventilation Grille and Hinge · Steel Blanking Plate for Network Cabinets · Black RAL 9005

The DIGITUS DN-97695 is a 2U 19-inch blanking panel in black ral 9005 sheet steel with a ventilation grille, used to close unused height units in network and server cabinets. Closing the gaps gives the cabinet a clean front, keeps loose cables and fingers out, and lets air pass through the grille instead of through open holes. Its hinge lets you swing the panel open for maintenance without unscrewing it from the rack.

It mounts on standard 19" (482.6 mm, IEC 60297) profile rails, and DIGITUS supplies the cage nuts, screws and washers in the box. The black RAL 9005 finish matches black cabinets; a grey twin is available.

• 1 × DIGITUS 2U blank panel with ventilation grille and hinge (DN-97695)
• Installation set: screws, cage nuts and washers

• Covers exactly 2U (88 mm) of rack height — count the empty units and combine 1U and 2U panels as needed.
• The vented design is meant for passive airflow; for a clear front-to-back cooling path in a hot-aisle layout, solid panels are the usual choice.
• Use the hinged panel in front of cable spaces or equipment you access often, so you do not lose cage nuts and screws at every visit.
• Steel panel, 0.45 kg — sturdy enough to stay straight on wide 19" rails.

• It is not a shelf and must not carry equipment.
• It does not fit 10" racks or wall boxes narrower than 19".
• The ventilation grille does not include a fan or a dust filter.
• It will not match a light grey cabinet — choose the grey twin.