DIGITUS 10-inch 1U Cable Management Panel with 3 Cable Rings for 254 mm Wall and Floor Racks, Black RAL 9005
Μάρκα:
Digitus
DIGITUS 10-inch 1U Cable Management Panel with 3 Cable Rings for 254 mm Wall and Floor Racks, Black RAL 9005
€16.56 inc. VAT
DN-10-ORG-1U-B
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
DIGITUS DN-10-ORG-1U-B — 10" 1U Cable Management Panel with 3 Rings, Black
10" (254 mm) racks1U height3 cable ringsBlack RAL 9005
The DIGITUS DN-10-ORG-1U-B is a 1U cable management panel with three cable rings for 254 mm (10-inch) wall-mounted and small floor-standing cabinets, finished in black RAL 9005. It holds patch cords horizontally between a patch panel and a switch, so every cable takes a short, visible path instead of hanging in front of the ports.
Its design is slim and uses just one height unit. The rings stand 50 mm proud of the rails, which leaves room for a handful of Cat.6 or fibre patch cords in each ring without crushing them.
Before you order: This panel is 10 inches (254 mm) wide and fits 10" rails only. It will not fit a 19" rack.
What's in the Box
- 1 × DIGITUS 10" 1U cable management panel with 3 rings, black RAL 9005
- Installation set: screws, cage nuts and washers (quantities are not itemised by DIGITUS)
What It Means in Practice
- The usual layout is patch panel – ring panel – switch. Short patch cords run from each port into the nearest ring and across to the matching switch port.
- The three rings split the 10" width into sections, so left, centre and right port groups stay apart and are easy to trace.
- The 50 mm depth sits in front of the rails. Check that the cabinet door clears it before you mount it directly behind a glass door.
- The black finish matches DIGITUS black 10" cabinets and the matching 0.5U brush panel.
What Will Not Work
- 19-inch racks. The panel is 254 mm wide and does not span 19" rails.
- Passing cables to the rear. The rings route cables across the front and there is no opening. Add a brush panel such as the DIGITUS DN-10-ORG-1-2U-B for that.
- Thick bundles. The rings are sized for patch cords, not for power cables or thick multi-core bundles.
- Bearing load. It is a cable panel, not a shelf.
Key Features
Three open rings
Cables drop in from the front, so there is nothing to thread and changes take seconds.
One height unit
A slim 44 mm panel that keeps 10" racks compact.
Complete install set
Screws, cage nuts and washers are included, so it is ready to mount.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Small 10-inch racks get messy quickly because the patch cords have nowhere to go. A 1U ring panel between the patch panel and the switch is the simplest fix, and it makes tracing a port a five-second job. If you are still choosing the switch for a 10" rack, compact models are in our network switches range.
✓ Buy it if you have a 10" cabinet with a patch panel and a switch and want the cords routed neatly across the front.
✕ Skip it if you have a 19" rack, or you need cables to pass to the back of the cabinet rather than across the front.
→ Also consider the DIGITUS DN-10-ORG-1-2U-B 0.5U brush panel in the same colour, for passing cables to the rear.
Tell us your cabinet model and door type and we will check that the panel depth clears the door before you order.
Colour
black
Χαρακτηριστικά
Product Code
04:365796
EAN Code
4016032454786
Manufacturer
Digitus