DIGITUS L-Shaped Slide Rails for 19-Inch Unique Cabinets 800-1000 mm Depth Adjustable 500-750 mm 100 kg Grey RAL 7035

The DIGITUS DN-19 GS-SRV is a pair of L-shaped support rails for 19-inch DIGITUS Unique network and server cabinets, adjustable in depth from 500 to 750 mm and rated for 100 kg — used to carry heavy rackmount equipment such as servers, UPS units and storage systems that come without their own rail kit.

Each rail consists of an inner and an outer profile that slide into each other to match the distance between your front and rear 19" rails; once set, the equipment rests on the L-shaped ledge. The rails are made of 2 mm galvanised sheet steel in light grey RAL 7035 and fix through threaded holes, so no cage nuts are needed.

• 1 × set of slide rails (2 rails, each with inner and outer profile)
• Fastening material

• Heavy 19" equipment sits on the rails instead of hanging from its front ears, which protects the ears and the front rails.
• Adjustable depth 500–750 mm covers the rail spacing of 800 and 1000 mm deep DIGITUS cabinets.
• Threaded holes speed up installation — screw straight in without cage nuts.
• Rails take up no usable rack height beyond the unit they support.

• They are not telescopic: equipment cannot be slid out for service on these rails.
• They will not fit cabinets where the front-to-rear rail distance is below 500 mm or above 750 mm.
• They will not fit wallmount cabinets or 2-post racks without rear rails.
• Fit in non-DIGITUS cabinets is not confirmed by the manufacturer.