DIGITUS DN-19 ORG-3U 19 Inch 1U Cable Management Panel with Brush Strip and Rear Cable Tray, Light Grey RAL 7035
Μάρκα:
Digitus
DIGITUS DN-19 ORG-3U 19 Inch 1U Cable Management Panel with Brush Strip and Rear Cable Tray, Light Grey RAL 7035
€25.99 inc. VAT
DN-19 ORG-3U
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
DIGITUS DN-19 ORG-3U — 1U 19" Cable Management Panel with Brush Strip and Cable Tray
1U · 19"Brush 30 x 400 mmTray with 24 fixing pointsLight Grey RAL 7035
The DIGITUS DN-19 ORG-3U is a 1U cable management panel for 483 mm (19") cabinets with a 30 x 400 mm brush strip at the front and a 480 x 120 mm cable tray at the rear with fixing points for up to 24 cables. Patch cords pass through the brush to the back of the cabinet while the opening stays mostly closed, and the tray behind it keeps the cables organised and strain-relieved.
It is made of sturdy sheet steel in light grey RAL 7035 and mounts on standard 19" profile rails with the installation set in the box. Despite the "3U" in the part number, the panel is 1U high.
Before you order: The "3U" in the part number does not mean 3 rack units — the panel is 1U. This is the light grey version; for a black cabinet order DN-19 ORG-3U-SW.
What's in the Box
- 1 x DIGITUS DN-19 ORG-3U 1U brush cable management panel with rear cable tray
- Installation set: screws, cage nuts and washers
What It Means in Practice
- Put the panel between a patch panel and a switch: cables go through the brush to the rear instead of hanging across the front.
- The rear tray gives up to 24 attachment points for cable ties, so a full 24-port run can be fixed in order.
- The brush closes most of the opening, which reduces dust and helps keep cooling air flowing through the equipment, not around it.
- Use one panel per 24 ports; for 48-port setups plan two panels.
What Will Not Work
- It does not fit 10" mini cabinets — it is for 19" profile rails only.
- It does not hold cables in front rings: if you want horizontal patch cords to stay at the front, choose a ring panel instead.
- It is not a vertical cable manager for the sides of the cabinet.
- It will not match a cabinet in the other colour — DN-19 ORG-3U is light grey only.
Key Features
Brush pass-through
A 30 x 400 mm brush strip lets cables through while closing the opening.
Rear cable tray
480 x 120 mm tray with fixing points for up to 24 cables.
1U, 19"
Mounts on 483 mm (19") profile rails to IEC 60297 in one rack unit.
Mounting set included
Screws, cage nuts and washers are in the box.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Brush panels suit cabinets where patching goes front-to-back, for example when switches are mounted at the rear. The rear tray is what makes this model better than a plain brush plate: cables are tied down, not just pushed through. Combine it with blanking panels from our Rack Accessories range to close the rest of the front.
✓ Buy it if you have a light grey 19" cabinet and route patch cords from front to rear through a closed brush opening.
✕ Skip it if you need front rings for horizontal patch cords, or you have a 10" cabinet.
→ Also consider DN-19 ORG-3U-SW in black, or a 1U ring panel with brush (DN-97668 grey) for front routing.
Not sure it fits your setup? Send us the model of your cabinet and how many ports you patch and we will suggest the right panels.
Colour
grey
Χαρακτηριστικά
Product Code
04:143691
EAN Code
4016032135395
Manufacturer
Digitus