DIGITUS DN-81001-01 HP Aruba Compatible SFP Transceiver 1000BASE-LX 1310 nm LC Duplex Single-Mode up to 20 km
Brand:
Digitus
DIGITUS DN-81001-01 HP Aruba Compatible SFP Transceiver 1000BASE-LX 1310 nm LC Duplex Single-Mode up to 20 km
€17.29 inc. VAT
DN-81001-01
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
DIGITUS DN-81001-01 — 1G LX Single-Mode SFP, 20 km, HP / Aruba Coded
1 Gbps1310 nm · LCUp to 20 kmHP / Aruba coded
The DIGITUS DN-81001-01 is a Gigabit SFP transceiver for single-mode fibre, coded for HP and HP Aruba switches: 1000BASE-LX at 1310 nm over an LC duplex connection, up to 20 km on 9/125 µm fibre. It gives HP / Aruba networks a lower-cost LX optic for links between buildings. In practice, single-mode optics are the choice when a link leaves the building or runs several hundred metres: the OS2 fibre used by carriers and campus backbones carries the signal for kilometres with little loss. Before you order, confirm the fibre is single-mode at both ends and note the length and the number of patch panels on the way.
Compatibility — check before buying:
It carries HP / HP Aruba coding; DIGITUS publishes no list of specific switch models, so send us yours first. It is a duplex module on two single-mode fibres and needs an LX module at the far end. Do not confuse it with the Cisco-coded DN-81001-02 or with the single-fibre BiDi DN-81003-01. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your device model and the cable run and we check it before you order.
Best For
✓ HP and HP Aruba switch SFP ports
✓ Gigabit links between buildings
✓ Campus backbones up to 20 km
✓ Single-mode (OS1/OS2) fibre
✓ Uplinks to a remote cabinet
✓ Spare optics at a low cost
Key Features
Coded for HP / Aruba
Programmed so HP and HP Aruba switches that check optics identify it as a compatible LX module.
Single-mode fibre, long reach
Built for single-mode (OS1/OS2) fibre, the type used between buildings, floors and sites. It will not run over the orange or aqua multimode fibre found in many racks — the fibre type has to match at both ends.
Hot-swappable
Modules and cables plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch or pull tab to remove it.
Plan both ends together
A link only comes up when both ends use the same standard, speed and media. Order the far-end part, the cable and any spares in one go and the link works on day one.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
We offer the DN-81001-01 for HP and Aruba switches that need a Gigabit single-mode link. Confirm the switch model with us, order the far-end module for its own switch brand, and use single-mode LC duplex cords. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status and we help you find out whether it is the module, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You need a 1G single-mode link up to 20 km on an HP or HP Aruba switch.
Skip it if
Your switch is Cisco, only one fibre strand is free, or your fibre is multimode.
Also consider
DIGITUS DN-81001-02 for Cisco switches.
Features - Digitus - DN-81001-01
More Details
Product Code
03:166946
EAN Code
4016032369967
Manufacturer
Digitus