DIGITUS DN-81000-01 HP Aruba Compatible SFP Transceiver 1000BASE-SX 850 nm LC Duplex Multimode up to 550 m
Μάρκα:
Digitus
DIGITUS DN-81000-01 HP Aruba Compatible SFP Transceiver 1000BASE-SX 850 nm LC Duplex Multimode up to 550 m
€21.72 inc. VAT
DN-81000-01
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
DIGITUS DN-81000-01 — 1G SX Multimode SFP, 550 m, HP / Aruba Coded
1 Gbps850 nm · LCUp to 550 mHP / Aruba coded
The DIGITUS DN-81000-01 is a Gigabit SFP transceiver for multimode fibre, coded for HP and HP Aruba switches: 1000BASE-SX at 850 nm over an LC duplex connection, up to 550 m on 50/125 or 62.5/125 µm fibre. It gives HP / Aruba networks a lower-cost SX optic that the switch identifies as compatible. In practice, multimode optics are the cheaper choice for links inside one building: most server rooms and floor risers already carry OM3 or OM4 fibre, and the module plus a short patch cord is all a port needs. Before you order, check the fibre grade printed on the cable jacket and the real length of the run, including patch panels.
Compatibility — check before buying:
It carries HP / HP Aruba coding; DIGITUS publishes no list of specific switch models, so send us yours before ordering. It needs multimode fibre and an SX module at the far end, and it is 1G only. Do not confuse it with DN-81000-04 (same optics, labelled HP / HPE) or the universal DN-81000. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your device model and the cable run and we check it before you order.
Best For
✓ HP and HP Aruba switch SFP ports
✓ Short fibre runs inside one building
✓ Server room and floor riser links
✓ OM2, OM3 or OM4 multimode cabling
✓ Gigabit uplinks between switches
✓ Spare optics at a low cost
Key Features
Coded for HP / Aruba
Programmed so HP and HP Aruba switches that check optics identify it as a compatible module.
Multimode fibre, short reach
Built for the short runs inside a building or data room over OM-grade multimode fibre. Reach depends on the fibre grade — check what is actually in your walls before you plan a link.
Hot-swappable
Modules and cables plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch or pull tab to remove it.
Plan both ends together
A link only comes up when both ends use the same standard, speed and media. Order the far-end part, the cable and any spares in one go and the link works on day one.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
We offer the DN-81000-01 for HP and Aruba switches that need a Gigabit multimode optic at a lower price than the OEM part. Check the switch model with us first, since DIGITUS does not publish a host list. For single-mode links the DN-81001-01 is the HP-coded LX sibling. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status and we help you find out whether it is the module, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You need a 1G multimode link up to 550 m on an HP or HP Aruba switch.
Skip it if
Your switch is Cisco or another brand, your fibre is single-mode, or the port is 10G-only.
Also consider
DIGITUS DN-81001-01 for single-mode HP links.
Χαρακτηριστικά
Product Code
04:365828
EAN Code
4016032369936
Manufacturer
Digitus