DIGITUS 19-inch 1U Cable Management Panel with Detachable Rear Plate and 3 Front Openings, Steel, Black RAL 9005

The DIGITUS DN-97617 is a 1U cable management panel for 19-inch (482.6 mm, IEC 60297) cabinets, built as a closed steel channel with three front openings and a detachable rear plate. It is finished in black RAL 9005 and guides patch cords horizontally across the rack while keeping the run itself enclosed.

The three 30 × 130 mm openings let cords enter and leave at the port groups they serve. Taking off the rear plate gives full access when you need to add or remove a lot of cables at once.

• 1 × DIGITUS 19" 1U cable management panel with detachable rear plate, black RAL 9005
• Mounting screws are not listed. Use 4 × M6 screws and cage nuts, for example the DIGITUS DN-19 SET.

• Cords run inside the channel and come out through the opening nearest their port. From the front you see three neat exits instead of a curtain of cables.
• The detachable rear plate means you can lay a whole bundle in from behind rather than threading it through the front slots.
• The steel body is rigid enough to span the full 19" width without sagging under a full cable load.

• 10-inch racks.
• Racks with less than about 68 mm of clearance in front of the rails.
• Passing cables straight to the rear of the cabinet. Use a brush panel for that.
• Bearing load. It is not a shelf.