DIGITUS 1U Fixed Shelf with Variable Rails for 19-Inch Cabinets from 1000 mm Depth 50 kg 4-Point Mounting Black RAL 9005

The DIGITUS DN-97649 is a 1U fixed shelf with adjustable-depth mounting rails for 19-inch network and server cabinets of 1000 mm depth or more, carrying up to 50 kg on a perforated steel tray in black RAL 9005 — the standard way to hold a non-rackmount server, NAS, UPS, modem or desktop PC securely inside a rack.

Because it is fixed at four points, front and rear, the load sits on all four 19" profile rails instead of hanging from the front ones, which is why it can take 50 kg. The rails slide to match the distance between your front and rear rails, up to a mounting depth of 900 mm, and the full M6 installation set is in the box.

• 1 × 1U shelf with variable mounting rails (Black RAL 9005)
• Installation set: M6 screws, cage nuts and washers

• 50 kg spread over four mounting points is enough for a tower server, a NAS with drives or a heavy line-interactive UPS.
• The perforated steel tray lets air pass through, so equipment on the shelf does not trap heat against the tray.
• Only 1U of rack height is used by the shelf itself; the device sitting on it uses whatever height it needs above.
• Adjustable rails mean the shelf also works if your rear rails are not at the factory position.

• It will not fit cabinets shallower than 1000 mm or racks without rear 19" rails.
• It is a fixed shelf — it does not slide out for service access; for pull-out access choose an extendible shelf.
• It will not fit a 2-post relay rack or wall bracket.
• The 50 kg rating assumes 4-point fixing; hanging it from the front rails only is not a supported installation.