Equip 19-Inch 1U Rack PDU with On/Off Switch, 8 Schuko Sockets, 16 A / 3500 W, 1.8 m Cable, Aluminium Shell, Silver

The Equip 333293 is a 1U 19-inch rack-mount PDU with eight Schuko (DIN 49440) outlets, an integrated on/off switch and a silver aluminium shell, fed by a 1.8 m H05VV-F 3G1.5 cable with 90° angled CEE 7/7 Schuko plug and rated 250 V / 16 A, max 3,500 W.

Fitted horizontally in 1U of a 19-inch cabinet or rack, it gives switches, routers, servers, NAS units and patch-room equipment their own Schuko power rail instead of a loose floor strip — tidier cabling, plugs that stay put, and power at the back of the rack where the equipment needs it.

• 1 × Equip 8-outlet German power distribution unit (silver)
• Quick installation guide
• Screw kits

• 8 Schuko outlets in a single rack unit — enough for a typical small-office rack with switch, router, firewall, NAS and a couple of servers.
• The master on/off switch powers the whole equipment stack down or up in one action — handy for maintenance and resets; keep it where it cannot be knocked accidentally.
• The aluminium shell helps heat dissipation and stands up to years in a cabinet; screw kits are included for installation.
• Sockets turned 45° accept angled plugs and power bricks without blocking neighbours.
• Most rack equipment ships with IEC (C13) to Schuko power cords in Europe, so it plugs straight in; equipment with UK cords needs a Schuko cord or adapter.

• The Schuko plug will not fit a standard Cyprus wall socket without an adapter, and UK-plug devices will not fit the outlets.
• It is a passive distribution strip: no metering, no remote switching and no network management.
• There is no surge protection or overload breaker listed — rely on the building circuit breaker and a UPS for protection.
• The 1.8 m input cable is fixed; if the feeding outlet is further away, plan the rack position or a suitable Schuko extension.
• It does not keep equipment running during a power cut — put a UPS in front of it if uptime matters.