Good Connections Fiber Patch Cable OS2 Singlemode LC/UPC to SC/UPC Duplex 7.5m LSZH Yellow
Brand:
GoodConnections
Good Connections Fiber Patch Cable OS2 Singlemode LC/UPC to SC/UPC Duplex 7.5m LSZH Yellow
€10.78 inc. VAT
LW-9075LS
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Good Connections OS2 Singlemode Fiber Patch Cable, LC/UPC to SC/UPC, Duplex, 7.5 m
OS2 · 9/125 µmLC/UPC ↔ SC/UPCDuplex7.5 m
The Good Connections LW-9075LS is a 7.5 m duplex OS2 singlemode fibre patch cable with LC/UPC on one end and SC/UPC on the other, made for singlemode links between switches, SFP/SFP+ optics, patch panels and media converters.
The cable uses an LSZH jacket with a 2.0 mm outer diameter in yellow, the standard colour for singlemode, so it is easy to tell apart in a busy rack. The duplex clip can be removed to swap polarity (A/B) on site, so a crossed link can be corrected without a new cable. Every cable is tested after assembly and ships with its own measurement report.
Before you order: The two ends are different: LC on one side, SC on the other. Check the port type on both devices (most SFP/SFP+ modules are LC; many older panels are SC) and make sure the fibre type matches — OS2 singlemode works with 1310/1550 nm long-reach (LR/LX/ER) singlemode optics only.
What's in the Box
- 1 × Good Connections OS2 duplex fibre patch cable, 7.5 m, LC/UPC – SC/UPC
- Dust caps fitted on every connector
- Individual test report for this cable
- Transceivers, couplers and patch panels are not included
What It Means in Practice
- Two fibres in one cable: one transmits, one receives — the normal setup for SFP, SFP+, SFP28 and most media converters.
- At 7.5 m it reaches between neighbouring racks or across a server room; for building backbones use installation cable and patch panels instead.
- Singlemode OS2 is the right choice for 1310/1550 nm optics (1000BASE-LX, 10GBASE-LR and similar) and for links that will be extended later over long distances.
- Respect the minimum bend radius (15 mm): route the cable in gentle loops and do not pinch it in rack doors or cable ties.
- Keep the connectors covered until the moment of connection and clean the end-faces if a link shows high loss — dirt is the most common cause.
What Will Not Work
- Multimode SR/SX transceivers (850 nm) — they need OM3/OM4/OM5 cable.
- Ports of another connector type (ST, MPO/MTP, E2000) without the right hybrid cable or adapter.
- Permanent in-wall or outdoor installation — this is a patch cable for racks, desks and equipment rooms.
Key Features
OS2 9/125 µm
Singlemode OS2 for 1310/1550 nm optics and long links.
LC/UPC – SC/UPC
Hybrid cable: connects an LC port to an SC port without an adapter.
LSZH jacket
Low-smoke, halogen-free jacket, 2.0 mm — suitable for offices and server rooms.
Swappable polarity
Remove the duplex clip to swap A/B on site.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Singlemode OS2 is the safe default for new fibre links: it handles 1G to 100G and long distances with the right optics. Match three things before ordering: fibre type (OS2), connector at each end (LC/UPC / SC/UPC) and polish. Typical partners are switches with SFP/SFP+ ports and the matching transceivers.
✓ Buy it if your ports are LC on one side and SC on the other and the link is OS2.
✕ Skip it if your transceivers are multimode SR/SX — order OM4 instead.
→ Also consider the same cable in other lengths, or the LC-LC version if both ends are LC.
Not sure which fibre or connector you have? Send us the model of your switch, transceiver or patch panel and we will check it before you order.
Features - GoodConnections - LW-9075LS
Colour
yellow
Length
7.5m
More Details
Product Code
04:480308
EAN Code
4014619461530
Manufacturer
GoodConnections