HP Poly Studio A2 Table Mic Input Cable – JST to Male Phoenix Connector – 6 m (20 ft) – Replacement Cable – Black
HP Poly Studio A2 Table Mic Input Cable – 6 m
The HP Poly Studio A2 Black Cable for Table Mic Input (B42BJAA) is the 6-metre JST-to-male-Phoenix cable that feeds a Studio A2 table microphone from the audio bridge or from the previous microphone in the chain.
It is the same type of cable that comes pre-connected to the 4-pin JST input of every A2 table mic, sold separately as a replacement or for re-cabling a room. HP Poly Studio A2 system: up to 8 table microphones daisy-chain to one PoE-powered A2 Audio Bridge, which connects to Poly Studio G62, V72, X72, V52, X52 or X32 video bars. HP states the A2 is not backward compatible with Studio X70/X50/X30, USB or G7500 devices.
What's in the Box
- Studio A2 table mic input cable, 6 m, JST to male Phoenix, black
What It Means in Practice
- Replaces a damaged or cut input cable without replacing the microphone.
- 6 m covers the run from the bridge or from one table mic to the next on most boardroom tables.
- Colour coding in the A2 system: the narrower male connector is blue, the wider female connector is red.
What Will Not Work
- HP states the Studio A2 system is not backward compatible with Poly Studio X70, X50, X30, USB video bars or G7500 – this cable is only useful in an A2 installation.
- It is not an analogue XLR or 3.5 mm microphone cable and does not connect to third-party mixers.