Intellinet 19" Cantilever Rack Shelf, 1U, 350 mm Depth, 2-Point Front Mount, Non-Vented, 25 kg, Grey RAL 7035

The Intellinet 715119 is a 19-inch cantilever shelf, 1U high and 350 mm deep, that mounts to the front rails only and carries up to 25 kg of static load. It is made of 1.2 mm steel with an antistatic powder coating in grey RAL 7035 and has a solid, non-vented surface.

It is designed for network racks and wall cabinets that have no rear rails, or where the rear rails are not at a convenient depth. Intellinet specifies it for racks with a minimum depth of 400 mm, which makes it a good fit for typical wall-mount cabinets holding a router, modem, NVR or small switch without ears.

• 1 x 19-inch 1U cantilever shelf, 350 mm deep, grey
• Set of 4 cage nuts

• Works in wall cabinets with front rails only - no rear rails needed.
• Solid (non-vented) surface is good for small items and power adapters that would otherwise slip through slots.
• For warm devices such as NVRs or routers, leave space above them, because the shelf itself does not allow airflow from below.
• Uses 1U of rack space.

• Racks shallower than 400 mm.
• Loads above 25 kg or heavy UPS units - use a fixed shelf on four points for that.
• Black cabinets if colour matching matters.
• Improved airflow from below - this model is non-vented.