Intellinet Outdoor Gigabit High-Power PoE+ Extender Repeater, IEEE 802.3at/af, 25 W Output, +100 m, IP65 Metal
Brand:
Intellinet
Intellinet Outdoor Gigabit High-Power PoE+ Extender Repeater, IEEE 802.3at/af, 25 W Output, +100 m, IP65 Metal
€153.87 inc. VAT
561211
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Reach an outdoor camera or access point beyond 100 m without running mains power
802.3at/af PoE+Up to 25 W outputIP65 metal housing-40 to 75 °C
The Intellinet 561211 is an outdoor Gigabit PoE+ extender that sits in the middle of a long Ethernet run and adds another 100 m, passing both data and up to 25 W of PoE power to an IEEE 802.3af/at camera, access point or IP phone.
Ethernet and PoE are limited to 100 m per cable segment. Place the extender at or before the 100 m point, and it regenerates the Gigabit signal and forwards power from your PoE switch or injector to the next segment, so a single unit gives you up to 200 m in total. It draws its own power from the incoming PoE, so no mains socket is needed at the mounting point. The fanless metal housing is rated IP65 and -40 to 75 °C, which suits poles, perimeter walls, car parks and building exteriors where a standard indoor extender would fail. Typical jobs are a gate or perimeter camera beyond the reach of the nearest cabinet, an outdoor access point across a car park, or a second building where pulling mains to the halfway point would cost more than the extender itself.
Before you order: The extender must be fed by an IEEE 802.3at or 802.3af PoE switch or injector. To pass the full 25 W to your device, the source must be 802.3at (PoE+); an 802.3af source cannot supply a 25 W load.
What's in the Box
- 1x Intellinet Outdoor Gigabit High-Power PoE+ Extender Repeater
- Instructions
What It Means in Practice
- One unit: switch to extender up to 100 m, extender to device up to 100 m, 200 m in total.
- Longer runs: up to four extenders can be cascaded for a maximum of 500 m. Each extra unit uses up to 4 W of the power budget, and longer cables add losses, so a high-draw device may not run at the end of a long chain.
- Power budget: the extender itself uses up to 4 W and outputs up to 25 W. Size your PoE source above the device draw plus the extender consumption.
- PoE-aware output: power is sent only to 802.3af/at devices. A non-PoE device on the output receives data only, so it is not damaged.
- Speeds: 10/100/1000 Mbps on both ports. Use Cat5e or better outdoor-rated cable for reliable Gigabit.
- Input accepts PoE on either pair set (Alternative A or B), so it works with both midspan injectors and PoE switches. Output is Alternative A (pins 1/2 and 3/6).
- Mounting is by the wall-mount holes in the housing; pole straps are not in the box.
What Will Not Work
- Running from a normal, non-PoE switch port: there is no power input on the extender, so it needs a PoE switch or injector upstream.
- Devices that need more than 25 W, such as PTZ cameras with heaters, high-power IR or 802.3bt access points.
- Passive 24 V or 48 V PoE devices: the output only powers IEEE 802.3af/at devices.
- Multi-gigabit (2.5G, 5G, 10G) links: the ports are Gigabit maximum.
- Pole mounting out of the box: pole brackets or straps are not published as included.
Key Features
Built for outdoors
IP65 metal housing, fanless, rated for -40 to 75 °C, so it can sit on an exterior wall or pole instead of in a cabinet.
No local power needed
It takes its power from the incoming PoE line, which removes the cost of bringing mains to a remote mounting point and means the device and extender restart together when you power-cycle the switch port.
PoE+ pass-through
Supports IEEE 802.3af and 802.3at on both sides and forwards up to 25 W to the powered device.
Shielded Gigabit ports
Two shielded RJ45 ports at 10/100/1000 Mbps reduce interference on long outdoor runs.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
Most extender problems come from the power budget, not the data. Start from the device's maximum draw, add 4 W for each extender in the chain, and make sure the switch port is 802.3at with that much to spare. Seal the cable entries and use outdoor-rated cable, because the IP65 rating protects the housing, not a bare RJ45 plug. Pair it with our IP cameras for perimeter coverage beyond 100 m.
✓ Buy it if Buy it if you need to place a PoE camera, access point or other 802.3af/at device between 100 m and 500 m from the switch, outdoors, without mains at the mounting point.
✕ Skip it if Skip it if your device needs more than 25 W, uses passive PoE, or needs multi-gigabit speeds; or if the distance is long enough that fibre with a media converter is the better link.
→ Also consider An 802.3at PoE+ switch or injector at the source, outdoor-rated Cat5e or Cat6 cable, weatherproof RJ45 boots and a pole bracket if you mount on a pole.
Tell us the device model, its power draw and the total distance, and we will check whether one extender, a chain or fibre is the right answer.
Features - Intellinet - 561211
Colour
silver
Interface
- Ethernet
Port Speed
- 1 Gbps
More Details
Product Code
04:252693
EAN Code
0766623561211
Manufacturer
Intellinet