Inter-Tech 3-Way RGB Splitter Cable, 1 x 4-Pin 12V RGB to 3 x 4-Pin RGB, 48 cm, with 3 Adapters

The Inter-Tech 88885466 is a 3-way splitter for 4-pin 12V RGB lighting: it takes one 4-pin RGB header on the motherboard or controller and splits it into 3 outputs, so 3 RGB fans, LED strips or other 12V RGB devices light up in sync.

The total length is 48 cm, with branches of 2 x 15 cm and 1 x 25 cm, and 3 extra 4-pin to 4-pin adapters are included for connectors of the other gender.

• 1 x Inter-Tech 3-way RGB splitter cable, 48 cm
• 3 x 4-pin to 4-pin RGB adapters

• Plug the input into the 4-pin RGB header on the motherboard (often labelled RGB, LED or 12V G R B) and connect up to 3 RGB devices.
• All connected devices show the same colour and effect, controlled by the motherboard software or the controller.
• Check the total load: motherboard RGB headers are usually limited to about 2–3 A in total for all devices.

• It does not work with 3-pin 5V ARGB / D-RGB devices or headers.
• It does not carry fan power or PWM speed control: RGB fans still need their separate fan cable.
• It cannot make devices show different colours: all outputs are in sync.
• It does not raise the current limit of the RGB header.