Kingston FURY Renegade 32GB (1x32GB) DDR5 6400MT/s CL32 Desktop Memory Module Intel XMP 3.0 Silver/Black

The Kingston FURY Renegade KF564C32RS-32 is a single 32GB DDR5 UDIMM desktop module rated at 6400 MT/s with CL32 latency, made for gaming and creator desktops that want fast DDR5 without exotic tuning.

Out of the box it starts at the safe default of DDR5-4800 CL40-39-39 1.1V; the rated 6400 MT/s CL32 at 1.4V is stored in the Intel XMP 3.0 profile, which you switch on once in the BIOS. The silver/black heat spreader stands 39.2 mm tall, low enough to clear most CPU air coolers.

FURY Renegade is Kingston's top performance line; this non-RGB version keeps the aggressive aluminium spreader without the light bar or RGB software.

• 1 × 32GB DDR5 UDIMM module (Silver/Black)
• Retail packaging only — no cables, screws or tools are needed or included

• After installing, enter the BIOS and enable XMP; until then the module runs at DDR5-4800 CL40-39-39 1.1V.
• The first boot with a new DDR5 profile takes longer than usual — the board trains the memory. A black screen for a minute or two is normal; do not switch off.
• One module runs single-channel. For dual-channel bandwidth, install two identical modules — or choose a matched two-module kit.
• 32GB comfortably covers gaming, browsers with many tabs and everyday photo editing.
• In games, faster memory mostly lifts minimum frame rates (1% lows) in CPU-bound titles; 6400 MT/s already captures most of that benefit.
• If your board is not stable at the top profile, select XMP profile 2 (DDR5-6000 CL32-38-38 1.35V) or 3 (DDR5-4800 CL38-38-38 1.1V) in the BIOS — no manual timing work needed.
• To confirm it is working, open Windows Task Manager → Performance → Memory: it should show 32GB and a speed of 6400 MT/s once the profile is on.

• DDR4 motherboards — DDR5 has a different key notch and will not physically fit a DDR4 slot.
• Laptops and mini PCs that use SO-DIMM — this is a full-size 288-pin desktop UDIMM.
• Servers and workstations that require ECC RDIMM or ECC UDIMM — this is non-ECC unbuffered memory.
• Rated speed on AMD AM5 is not covered: Kingston lists Intel XMP 3.0 only for this part. For AMD, choose an EXPO kit.
• Mixing with other RAM — adding modules from a different kit, even the same model, is not guaranteed to run at the rated speed.