Kingston FURY Renegade 48GB DDR5-6400 CL32 Desktop Memory DIMM, 1.4V, Intel XMP, Black, Non-ECC

The Kingston FURY Renegade KF564C32RS-48 is a 48GB 288-pin unbuffered DDR5 desktop DIMM rated at 6400 MT/s with CL32 latency at 1.4V, for gamers, creators and power users building or upgrading a DDR5 desktop.

It comes as one 48GB module, giving 48GB in total and up to 51.2 GB/s of peak bandwidth per module (PC5-51200). DDR5 splits every module into two independent sub-channels and runs at far higher transfer rates than DDR4, which helps frame times in CPU-bound games and shortens compile, render and export jobs.

Typical uses: a new AM5 or Intel 600/700/800-series gaming build, a streaming or editing PC that needs headroom, or replacing a smaller DDR5 kit with 48GB so that games, browser, chat and capture software can all stay open without the system paging to disk.

• 1 × 48GB DDR5 DIMM module
• Manufacturer packaging — memory installs tool-free into the slot, no cables or drivers needed

• Out of the box it boots at 4800 MT/s CL40 at 1.1V. Enabling XMP in BIOS is a one-click setting that loads the rated 6400 MT/s CL32 profile — the final speed depends on your CPU’s memory controller and motherboard.
• A single module runs in single-channel mode. For dual-channel bandwidth (noticeably better in games and with integrated graphics) pair it with a second identical module — buying a matched kit is the safer route.
• 48GB suits heavy content creation, large projects, virtual machines and professional applications that cache aggressively.
• Height matters with large tower air coolers: at 39.2 mm check the clearance under your cooler’s front fan.
• Installation takes a few minutes: power off and unplug the PC, open the side panel, release the slot latches and press each module straight down until the latches click shut on both ends.
• After installation, Windows Task Manager (Performance → Memory) shows the total capacity, the speed in MT/s and how many slots are used — a quick way to confirm everything is detected.

• DDR4 or DDR3 motherboards — DDR5 is keyed differently and physically will not fit
• Laptops and mini PCs that take SO-DIMM memory
• Servers that require registered (RDIMM) ECC memory — this is non-ECC unbuffered memory
• Guaranteed dual-channel matching with a different brand or model already in the PC