Kingston Industrial 32GB — pSLC microSD for embedded and harsh environments
32 GB microSDHCpSLC · 30K P/E cycles-40 to 85 °CU3 · V30 · A1
The Kingston Industrial 32GB (SDCIT2/32GBSP) is a microSDHC UHS-I card built for industrial, embedded and continuous-recording use. It uses TLC NAND running in pSLC mode rated for 30,000 program/erase cycles, operates from -40 °C to 85 °C and is rated Class 10, U3, V30 and A1, with speeds of up to 100 MB/s read and 80 MB/s write.
It adds industrial firmware features such as power-failure protection, wear levelling, bad block management, ECC, auto-refresh and health monitoring, and is IPX7 waterproof, temperature proof and X-ray proof. This "SP" version is the single card without an SD adapter.
Before you order: This is the card-only version — no SD adapter in the box. It is formatted FAT32 (SDHC); devices that need more than 32 GB require a larger capacity.
What's in the Box
- Kingston Industrial 32GB microSDHC card (no SD adapter)
What It Means in Practice
- pSLC mode stores one bit per cell, giving far higher write endurance than a consumer card — suited to dashcams, CCTV, data loggers, single-board computers and kiosks that write constantly.
- Power-failure protection helps prevent corruption when an embedded device loses power unexpectedly.
- The -40 to 85 °C range covers outdoor cabinets, vehicles and industrial enclosures.
- Kingston publishes endurance only for the largest capacity; for 32 GB no TBW figure is published.
What Will Not Work
- Full-size SD slots without a separately purchased adapter.
- A2 app-performance level — this card is A1.
- Capacities above 32 GB — choose a larger SDCIT2 model.
- OEM or special-use qualification — Kingston advises contacting them for such applications.
Key Features
pSLC endurance
TLC NAND in pSLC mode, 30K P/E cycles.
Industrial temperature
Operation and storage from -40 to 85 °C.
Data protection
Power-failure protection, ECC, wear levelling, auto-refresh, health monitoring.
Rugged
IPX7 waterproof, temperature proof, X-ray proof.
Technical Specifications
| Identification |
| Part Number |
SDCIT2/32GBSP |
| EAN / GTIN |
0740617321067 |
| Brand |
Kingston |
| Series |
Industrial microSD |
| Performance |
| Capacity |
32 GB |
| Format |
microSDHC, FAT32 |
| Speed class |
UHS-I, Class 10, U3, V30, A1 |
| Read / write |
Up to 100 / 80 MB/s |
| NAND |
TLC in pSLC mode, 30K P/E cycles |
| Environment & physical |
| Operating temperature |
-40 to 85 °C |
| Storage temperature |
-40 to 85 °C |
| Durability |
IPX7 waterproof, temperature proof, X-ray proof |
| Dimensions |
11 x 15 x 1 mm |
| Voltage |
3.3 V |
| Firmware features |
| Features |
Bad block management, ECC, power-failure protection, wear levelling, auto-refresh, dynamic data refresh, garbage collection, health monitoring |
| Warranty |
| Warranty |
1-Year Warranty (Singular) |
| Manufacturer Term |
3-year warranty per Kingston — claims handled through Singular |
Frequently Asked Questions
Why choose this over a cheaper consumer card?
pSLC NAND and industrial firmware give much higher write endurance and better resistance to power loss — important for devices that record 24/7.
Is an SD adapter included?
No. SP is the single-card version without adapter.
Is it suitable for a Raspberry Pi?
Yes, any device with a microSDHC slot can use it, and the endurance suits always-on systems.
Singular Expert Insight · Buyer's Guide
The sensible choice for devices that write all day — CCTV, dashcams, loggers and single-board computers — where a consumer card would wear out or corrupt. If you need to read it on a PC, add an adapter or a
card reader.
✓ Buy it if you need a durable 32 GB microSD for embedded, surveillance or outdoor equipment.
✕ Skip it if you just need storage for a phone or camera — a consumer card is cheaper.
→ Also consider a larger SDCIT2 capacity if 32 GB is not enough.
Send us your device model and recording load, and we will confirm the right card before you order.