KLEVV DDR4 SODIMM 16GB DDR4-3200 CL22 Bulk — KD4AGSA80-32N2200
16 GB single moduleDDR4-3200, PC4-25600CL22, 22-22-22-51 at 1.2 VBulk tray packaging
The KLEVV DDR4 SODIMM 16GB is a single 260-pin laptop memory module running at DDR4-3200 with JEDEC CL22 timings of 22-22-22-51 at 1.2 V, supplied here in bulk tray packaging rather than a retail blister. It is part number KD4AGSA80-32N2200, identical in every electrical and physical respect to the retail KD4AGSA80-32N220A, and is intended for notebooks, mini-PCs, Intel NUCs and all-in-ones. The module sits on a matte black PCB with no heat spreader, is non-ECC and unbuffered, and is built with SK hynix DRAM. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
This is the bulk tray version. The final digit of the part number is what distinguishes it: -32N2200 is bulk, -32N220A is the retail single, and -32N220D is a retail two-module kit. The memory itself is the same in all three. Bulk modules ship in protective tray or anti-static packaging without a consumer blister pack, which is why they exist for system builders and service work — expect the module and nothing else.
This is a 260-pin SO-DIMM for laptops, not a desktop module. It will not fit a 288-pin desktop DIMM slot. The desktop equivalent is KD4AGUA80-32N2200 — one letter different, same capacity, speed and latency. Match the part number, not the description: marketplace listings do get this wrong.
There are two different 16GB DDR4-3200 CL22 SO-DIMMs in KLEVV’s own range. This one is KD4AGSA80; the other is KD4AGS880. They differ in DRAM die density and therefore almost certainly in rank, and KLEVV publishes rank for neither. If you are adding to an existing module, matching the exact part number is the safest route.
It has no XMP profile. DDR4-3200 CL22 at 1.2 V is the JEDEC standard bin, so there is nothing to overclock to. On a laptop platform that tops out at DDR4-2666 or DDR4-2933 the module will automatically run at that lower speed with the corresponding JEDEC timings. That is normal, not a fault.
This is not a BOLT or CRAS gaming module. Those are 288-pin desktop DIMMs with aluminium heat spreaders, XMP 2.0, CL16 or CL18 timings and 1.35 V.
Best For
✓ System builders and integrators fitting memory at assembly
✓ IT departments and repair shops buying without retail packaging
✓ Upgrading a laptop from 8 GB to 16 GB or beyond
✓ Intel NUC and mini-PC memory upgrades
✓ All-in-one desktops that use SO-DIMM memory
✓ Anyone who wants JEDEC-standard memory with no tuning
Key Features
Same module, less packaging
Electrically and physically identical to the retail KD4AGSA80-32N220A — same 16 GB, same DDR4-3200, same 22-22-22-51 timings, same SK hynix DRAM. The only difference is that it arrives in tray or anti-static packaging instead of a consumer blister.
16 GB in a single slot
A single module leaves the second SO-DIMM slot free, so you can reach 32 GB later without discarding anything. On a two-slot laptop already carrying 16 GB, adding this one doubles it.
DDR4-3200 at JEDEC timings
3200 MT/s gives up to 25.6 GB/s of bandwidth at the standard 22-22-22-51 latency and 1.2 V. Because it is the JEDEC bin rather than an overclocked profile, it needs no BIOS configuration and runs correctly on first boot — which matters when you are building or servicing in volume.
Bare black module, no heat spreader
A matte black PCB with no heatsink is the correct design for a laptop: SO-DIMM bays have almost no clearance, and a heat spreader would prevent the module seating under a keyboard or bottom cover.
Technical Specifications
| Identification |
| Brand |
KLEVV (Essencore) |
| Model |
DDR4 SODIMM Standard Laptop Memory |
| Part Number / MPN |
KD4AGSA80-32N2200 |
| EAN / GTIN |
4895194966425 |
| Packaging |
Bulk tray — the trailing 0 in the part number denotes bulk |
| Retail equivalent |
KD4AGSA80-32N220A (retail single module). KD4AGSA80-32N220D is the retail two-module kit |
| Sibling part |
KD4AGS880-32N2200 is a second 16GB DDR4-3200 CL22 bulk SO-DIMM in the same range, built on a different die density |
| Desktop equivalent |
KD4AGUA80-32N2200 (288-pin UDIMM) |
| Product type (manufacturer term) |
DDR4 SODIMM |
| Memory Specification |
| Capacity |
16 GB — single module, not a kit |
| Form factor |
260-pin DDR4 Small Outline DIMM (SO-DIMM) |
| Speed |
DDR4-3200, 3200 MT/s, PC4-25600 |
| Bandwidth |
Up to 25.6 GB/s |
| Timings |
22-22-22-51 at 1.2 V |
| CAS latency |
CL22 |
| Voltage |
1.2 V |
| ECC |
Non-ECC, unbuffered |
| Standard |
Fully compliant to JEDEC standard |
| XMP |
No XMP profile — DDR4-3200 CL22 at 1.2 V is the JEDEC bin. KLEVV’s web page mentions Intel XMP and AMD Ryzen validation, but its datasheet specifies JEDEC only and no profile is provided |
| Rank / organisation |
Not published by KLEVV |
| Physical & Environmental |
| DRAM |
SK hynix chips, per KLEVV |
| PCB |
Matte black |
| Heat spreader |
None |
| Dimensions |
Not published by KLEVV. The module conforms to the standard JEDEC SO-DIMM outline |
| Operating temperature |
0 °C to 85 °C |
| Compatibility |
| Systems |
Laptops, notebooks, mini-PCs, Intel NUCs and all-in-ones with 260-pin DDR4 SO-DIMM slots |
| Platforms named by KLEVV |
Intel Raptor Lake, Alder Lake and Rocket Lake; AMD Ryzen 3, 5, 7 and 9 on AM4 |
| Lower-speed platforms |
Runs automatically at the host’s maximum supported DDR4 speed if that is below 3200 |
| Mixing modules |
If paired with a different module the system runs at the slower speed and looser timings. KLEVV publishes no formal mixing guidance |
| Warranty |
| Warranty |
1-Year Warranty (Singular) |
| Manufacturer Term |
Essencore publishes a Limited Lifetime Warranty on all KLEVV memory modules, and states that where local law requires a defined maximum period it will provide service accordingly, so the term is global rather than US-only. Manufacturer RMA runs through the reseller with proof of purchase. Singular’s direct warranty is 1 year; beyond that we assist you with the manufacturer’s warranty process for its full duration. |
Frequently Asked Questions
What is the difference between the bulk and retail versions?
Only the packaging. KD4AGSA80-32N2200 is bulk and KD4AGSA80-32N220A is retail, and the module inside is the same 16 GB DDR4-3200 CL22 SO-DIMM with the same SK hynix DRAM and the same warranty. Bulk modules arrive in tray or anti-static packaging rather than a consumer blister pack, which suits system builders, integrators and repair work. If you want a boxed unit to put on a shelf or give as part of a retail sale, take the -32N220A instead.
Will this fit a desktop PC?
No. This is a 260-pin SO-DIMM for laptops, mini-PCs, NUCs and all-in-ones. A desktop tower takes a 288-pin UDIMM, and the notch positions differ so it physically will not seat. KLEVV’s desktop equivalent is KD4AGUA80-32N2200 — one letter different, so check the part number rather than the photograph.
Does it have an XMP profile, and will I get 3200 MHz?
There is no XMP profile, and none is needed: DDR4-3200 with CL22 timings at 1.2 V is the JEDEC standard specification, so the module is recognised and runs correctly with no BIOS changes. Whether you actually reach 3200 depends on the machine — if the platform tops out at DDR4-2666 or DDR4-2933, the module runs at that speed instead. It still works; it simply cannot exceed what the memory controller supports.
Can I mix it with the memory already in the machine?
Usually yes, with caveats. The system runs everything at the slower module’s speed and the looser of the two timing sets, and mixing different capacities or ranks can affect dual-channel behaviour on some platforms. For a predictable result use two identical modules, or KLEVV’s matched kit which carries the -32N220D suffix.
Who actually makes KLEVV memory?
KLEVV is the memory brand of Essencore Limited, a Hong Kong-headquartered company within Korea’s SK Group — the same group that owns SK hynix. Essencore is a sister company rather than a subsidiary of SK hynix, but KLEVV states these modules are built with SK hynix DRAM chips.
Singular Expert Insight
Bulk memory is bought for a reason: you are fitting it into a machine rather than putting it under a tree, and the blister pack is waste you would throw away in the same motion. Electrically this is the identical module to the retail KD4AGSA80-32N220A, with the same JEDEC DDR4-3200 timings, the same SK hynix DRAM and the same manufacturer term, so the only question is whether you need retail packaging. Two part-number cautions apply regardless of which you buy. The desktop twin differs by one character, and marketplace listings do mix them up. And KLEVV sells two different 16GB DDR4-3200 CL22 SO-DIMMs without publishing rank for either, so if you are pairing with an existing stick, matched pairs are the safer purchase. Browse the rest of our
laptop DDR4 range for kits and other capacities, or the wider
memory section if the machine is a desktop.
Buyer’s Guide
Buy it if
You are building or servicing machines and want the same 16 GB DDR4-3200 SO-DIMM without paying for retail packaging you would immediately discard.
Skip it if
You want a boxed retail unit, you have a desktop tower, you need ECC or a low-latency overclocking profile, or you want a guaranteed matched pair.
Also consider
The retail KD4AGSA80-32N220A if you want a boxed module, the -32N220D matched two-module kit if you are filling both slots, or the desktop KD4AGUA80-32N2200 if the machine is a tower.