KLEVV 16GB DDR5 5600 MT/s SO-DIMM Laptop Memory, CL46, 1.1V, 262-pin, JEDEC Standard, On-Die ECC

The KLEVV 16GB DDR5 5600 SO-DIMM is a single 262-pin laptop memory module running at 5600 MT/s with CL46 timings at 1.1V, for upgrading or replacing RAM in DDR5 laptops, mini PCs and all-in-ones. It follows the JEDEC standard, so it runs at its rated speed without any XMP or EXPO profile on both Intel and AMD platforms that support DDR5-5600.

Like all DDR5 modules it carries an on-module power management IC (PMIC) and on-die ECC for data integrity inside the DRAM chips. KLEVV backs its standard memory with a limited lifetime warranty. This is the bulk version: the module is supplied without retail packaging.

• 1 x KLEVV 16GB DDR5 5600 SO-DIMM module (bulk, no retail packaging)

• In a laptop that supports DDR5-5600 it runs at full speed straight away; in a 4800 or 5200 system it simply clocks down to the platform speed.
• For dual-channel performance, install two modules of the same size and speed — one module runs single-channel.
• Mixing with a different-brand module usually works at JEDEC speed, but a matched pair avoids compatibility surprises.
• Installation takes a few minutes with a screwdriver on laptops with an accessible memory slot.

• It will not fit DDR4 laptops — DDR5 and DDR4 SO-DIMMs have different key notches.
• It does not fit desktop PCs; desktops need full-size 288-pin UDIMM modules.
• It is not a registered or ECC server module; on-die ECC is not the same as sideband ECC.
• Laptops with memory soldered to the motherboard cannot be upgraded.