KMP Compatible Ink Refill Bottle for Epson 113 Cyan (C13T06B240), 70 ml, up to 6,000 Pages, EcoTank

KMP E239C is a cyan ink refill bottle made by KMP PrintTechnik AG (Germany) as a compatible replacement for the Epson 113 Cyan (C13T06B240), holding 70 ml and rated at up to 6,000 pages for Epson EcoTank and EcoTank Pro printers that use 113 ink bottles.

Epson 113 printers are high-volume EcoTank models with refillable ink tanks instead of cartridges. You refill each colour from a bottle when its tank runs low. This bottle refills the cyan tank.

• 1 × KMP E239C ink refill bottle, cyan, 70 ml (replaces Epson 113 Cyan (C13T06B240))
• Single bottle only — the printer, the other colours and any printhead are not included

• KMP rates this bottle at up to 6,000 pages. Treat it as a guide: EcoTank yields depend heavily on how much colour and coverage your pages carry.
• Refill one colour at a time, slowly, with the printer switched on and the tank lid open only for the colour you are filling. Cap the bottle straight after use and store it upright, away from heat and sunlight.
• If you are switching an existing tank over from genuine ink, it is best to top up when the tank is low rather than mixing two inks in a nearly full tank. Run one nozzle check after the first refill so you see clean output before an important job.
• Fill only the tank of the matching colour. Each tank on the printer is labelled; putting one colour into another tank mixes the inks in the tank and the line to the printhead.
• For colour-critical photo work, print one test page after the change and compare it with your previous output before a large job.
• Keep spare cartridges or bottles sealed until you need them; ink in an opened container slowly dries at the nozzle or outlet, and a sealed pack keeps the ink in the condition it left the factory.

• It will not fit EcoTank models that use 101, 102, 103, 104, 106, 112 or 114 bottles.
• It is cyan only — the other colours are separate bottles.
• It cannot be used in cartridge-based Epson printers.
• It does not repair a clogged or worn printhead. If the original ink already printed streaks or missing lines, run the printer's cleaning cycle first — new ink cannot fix a printhead fault.