KMP C137 Ink Cartridge Replacing Canon CL-561XL (3730C001), Tri-Colour, 13 ml, 300 Pages, for Pixma TS5350, TS5450, TS7450

The KMP C137 (1581,4030) is a high-yield tri-colour printhead cartridge that replaces the Canon CL-561XL (3730C001) in the Pixma TS5300, TS5400 and TS7400 series. It is meant for home users and students printing colour documents, school projects and photos.

It is a single cartridge holding cyan, magenta and yellow, 13 ml in total, rated by KMP at 300 pages to ISO/IEC 24711. It carries a chip so the printer can read the ink level.

• 1x tri-colour printhead cartridge (cyan, magenta, yellow), replaces Canon CL-561XL (3730C001), 13 ml
• No black cartridge or printer included

• When one of the three colours runs out, the whole cartridge is replaced; that is how the original CL-561XL works too.
• Each cartridge brings fresh print nozzles, which often fixes banding in colour prints.
• Install each cartridge the same way as the original: remove the orange clip or protective tape, push it into the matching colour slot until it clicks, and close the cover.
• The printer may show a one-time message that a non-original cartridge was detected; confirm it on the panel and printing continues normally.
• Print a nozzle check after the swap. If one colour shows gaps, one standard cleaning cycle normally clears it; repeated deep cleaning only wastes ink.
• Store spare cartridges sealed, upright and at room temperature, and use them within the date printed on the pack.

• Canon printers using CL-541, CL-546, CL-576 or other cartridge families: different shape.
• Black text printing: pair it with a PG-560 or PG-560XL black cartridge.
• Printers that are not on the compatibility list, even from the same brand and family: cartridge shape and chip differ between series.
• Refilling or swapping chips between cartridges: the cartridges are supplied ready to use and are not meant to be refilled by the user.