Lanberg RSFE-16P-2C-250 16-Port Fast Ethernet PoE+ Unmanaged Switch 2 Gigabit Combo Uplink 250W Rack 1U
Μάρκα:
Lanberg
Lanberg RSFE-16P-2C-250 16-Port Fast Ethernet PoE+ Unmanaged Switch 2 Gigabit Combo Uplink 250W Rack 1U
€170.22 inc. VAT
RSFE-16P-2C-250
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Lanberg RSFE-16P-2C-250 16-Port Fast Ethernet PoE+ Rack Switch
16× Fast Ethernet PoE+250W PoE Budget2× Gigabit Combo Uplink19" 1U Rack, Unmanaged
The Lanberg RSFE-16P-2C-250 is an unmanaged 16-port PoE+ rack switch built to power a large set of IP cameras, wireless access points or VoIP phones from a single 1U slot. Its sixteen 100Mbps Fast Ethernet ports each deliver up to 30W of 802.3af/at power from a generous 250W total budget, while two Gigabit combo ports handle uplinks over copper or fibre. Supplied under part number RSFE-16P-2C-250, it adds an Extend mode for runs up to 250m. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
The 16 PoE ports are 100Mbps Fast Ethernet (not Gigabit) — some listings mislabel them as 10/100/1000. Only the 2 combo uplink ports are Gigabit. PoE follows IEEE 802.3af/at (up to 30W per port) — 802.3bt (60–90W) devices are not supported. This is an unmanaged switch (with basic VLAN isolation and Extend toggles), not a fully managed one. It has an internal AC power supply and a cooling fan.
Best For
✓ CCTV and IP-camera installs powering many cameras from one rack switch
✓ Small to medium PoE deployments needing 16 powered ports on a budget
✓ Cable runs beyond 100m using Extend mode up to 250m
✓ Rack-mounted network cabinets (19", 1U)
✓ Wireless APs, VoIP phones and access control over PoE+
✓ Plug-and-play unmanaged setups with basic VLAN isolation
Key Features
16 PoE+ Ports, 250W Budget
Sixteen 100Mbps Fast Ethernet ports each supply up to 30W of IEEE 802.3af/at PoE+, sharing a generous 250W budget to run many cameras, APs or phones.
2 Gigabit Combo Uplinks
Two combo uplink ports each work as Gigabit RJ45 or SFP fibre, giving a fast, flexible link up to your core switch or router.
Extend Mode to 250m
Switch a port into Extend mode to carry PoE and data up to 250m over one cable — well beyond the usual 100m limit — ideal for distant cameras.
Rack-Ready & Protected
A 19" 1U steel chassis with active cooling, 6kV surge protection and intelligent PoE port auto-recovery keeps installations reliable.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The RSFE-16P-2C-250 is built for one job: powering a lot of cameras or access points from a single rack slot without breaking the budget. Its 100Mbps PoE ports are ideal for surveillance (cameras seldom need Gigabit), while the two Gigabit combo uplinks and Extend-to-250m mode handle backhaul and long runs. If you need managed features such as VLAN tagging, QoS and monitoring, or Gigabit to every camera, look at a managed or full-Gigabit PoE switch instead. Browse the full range in our Switch - Bridges category, and pair it with cameras from our IP Cameras range.
Buyer's Guide
Buy it if
You are powering up to 16 IP cameras or APs from a rack and want a big 250W PoE+ budget, Gigabit uplinks and long-range Extend mode at low cost.
Skip it if
You need Gigabit to every device, managed features (VLAN tagging, QoS), or 802.3bt high-power PoE.
Also consider
A Gigabit PoE+ switch if cameras need full Gigabit, or a smart-managed PoE switch if you want VLANs and monitoring.
Colour
black
Standard
16-Port
Port Spped
- 10/100 Mbps,
- 1 Gbps
Χαρακτηριστικά
Product Code
04:486129
EAN Code
5901969429305
Manufacturer
Lanberg