Lanberg RSFE-16P-2C-150 16-Port Fast Ethernet PoE+ Unmanaged Switch 2 Gigabit Combo Uplink 150W Rack 1U
Μάρκα:
Lanberg
Lanberg RSFE-16P-2C-150 16-Port Fast Ethernet PoE+ Unmanaged Switch 2 Gigabit Combo Uplink 150W Rack 1U
€163.51 inc. VAT
RSFE-16P-2C-150
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Lanberg RSFE-16P-2C-150 16-Port Fast Ethernet PoE+ Rack Switch
16× Fast Ethernet PoE+150W PoE Budget2× Gigabit Combo Uplink10"/19" 1U Rack, Unmanaged
The Lanberg RSFE-16P-2C-150 is an unmanaged 16-port PoE+ rack switch built to power a large set of IP cameras, wireless access points or VoIP phones from a single 1U slot. Its sixteen 100Mbps Fast Ethernet ports each deliver up to 30W of 802.3af/at power, sharing a 150W total budget, while two Gigabit combo ports handle uplinks over copper or fibre. Supplied under part number RSFE-16P-2C-150, it fits both 10-inch and 19-inch racks and adds an Extend mode for runs up to 250m. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
The 16 PoE ports are 100Mbps Fast Ethernet (not Gigabit) — some listings mislabel them as Gigabit. Only the 2 combo uplink ports are Gigabit. PoE follows IEEE 802.3af/at (up to 30W per port) within a 150W shared budget — so not all 16 ports can draw maximum power at once; 802.3bt (60–90W) devices are not supported. This is an unmanaged switch with an internal AC power supply and a cooling fan.
Best For
✓ CCTV and IP-camera installs powering many cameras from one rack switch
✓ Small to medium PoE deployments on a moderate 150W budget
✓ Cable runs beyond 100m using Extend mode up to 250m
✓ Both 10-inch and 19-inch rack cabinets (1U)
✓ Wireless APs, VoIP phones and access control over PoE+
✓ Plug-and-play unmanaged setups with basic VLAN isolation
Key Features
16 PoE+ Ports, 150W Budget
Sixteen 100Mbps Fast Ethernet ports each supply up to 30W of IEEE 802.3af/at PoE+, sharing a 150W budget to run many cameras, APs or phones.
2 Gigabit Combo Uplinks
Two combo uplink ports each work as Gigabit RJ45 or SFP fibre, giving a fast, flexible link up to your core switch or router.
Extend Mode to 250m
Switch a port into Extend mode to carry PoE and data up to 250m over one cable — well beyond the usual 100m limit — ideal for distant cameras.
10"/19" Rack, Protected
A 1U metal chassis fits both 10-inch and 19-inch racks, with active cooling, 6kV surge protection and intelligent PoE port auto-recovery.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The RSFE-16P-2C-150 is the moderate-budget sibling in Lanberg's 16-port PoE range: the same 16 Fast Ethernet ports, Gigabit combo uplinks and Extend-to-250m mode, but a 150W PoE budget rather than 250W. It is ideal when your cameras or APs are low-to-mid draw and you want to save on a big power supply; if you need to run many high-power devices at once, choose the 250W version. Browse the full range in our Switch - Bridges category, and pair it with cameras from our IP Cameras range.
Buyer's Guide
Buy it if
You are powering up to 16 low-to-mid-draw IP cameras or APs from a 10" or 19" rack and want Gigabit uplinks and Extend mode at low cost.
Skip it if
You need to run many high-power PoE devices at once (choose the 250W version), Gigabit to every device, or managed features.
Also consider
Lanberg RSFE-16P-2C-250 (250W budget) if your devices need more total PoE power.
Colour
black
Standard
16-Port
Port Spped
- 10/100 Mbps,
- 1 Gbps
Χαρακτηριστικά
Product Code
04:486130
EAN Code
5901969429299
Manufacturer
Lanberg