Lanberg 1U Sliding Shelf for 19-Inch FF01 Floor-Standing Cabinets 800 mm Depth 463 x 550 mm 60 kg Static Load Black

The Lanberg AK-1007-B is a black 1U sliding (pull-out) shelf for 19-inch cabinets, 465 mm wide and 550 mm deep with a static load rating of up to 60 kg — designed specifically for Lanberg FF01 floor-standing cabinets in black with a depth of 800 mm.

A pull-out shelf lets you slide a tower server, NAS, KVM console or test equipment out of the cabinet for cabling and service, then push it back in. The metal shelf ships with M6 screws for mounting.

• 1 × 1U sliding shelf, black
• M6 mounting screws

• Pull the equipment forward to reach rear ports, then slide it back — no need to lift a heavy device out of the rack.
• 60 kg static capacity covers most tower servers, NAS units and small UPS systems when the shelf is closed.
• 1U of rack height for the shelf itself; the equipment on top uses the height it needs.
• Matching Lanberg cabinet and shelf avoids the most common problem with sliding shelves: rail spacing that does not match.

• It will not fit grey Lanberg FF01 cabinets, and fit in non-Lanberg cabinets is not confirmed by the manufacturer.
• It is designed for 800 mm deep FF01 cabinets — not for 600 mm or 1000 mm deep versions or wallmount cabinets.
• The 60 kg figure is a static load rating; do not stand heavy loads on the shelf while it is pulled out.
• It is not for 2-post open frames.