Lanberg Power Extension Cable IEC C14 Plug to C13 Socket, 1.8 m, VDE Certified, 10 A, 100% Copper, Black

The Lanberg CA-C13E-11CC-0018-BK is a 1.8 m VDE-certified IEC power extension cable with a C14 plug and a C13 socket, for connecting PCs, monitors, servers and printers to a UPS or rack PDU, or for lengthening an existing C13 power cord.

Lanberg rates it at 10 A with a maximum working power of 2500 W and builds it with 100% copper conductors; the VDE mark means the cable has been tested by the German testing institute rather than only self-declared.

• 1 x Lanberg IEC C14 to C13 power extension cable, 1.8 m, black

• C14 end into the UPS or PDU outlet, C13 end into the device: this matches the inlet on most desktop PCs, monitors, servers, switches and laser printers.
• Plug an existing C13 cord into the C14 end to gain 1.8 m when the device sits further from the wall than its cord allows.
• 2500 W is far above what a typical office PC or monitor draws, so the cable is not the limiting part of the setup.

• It does not plug into a wall socket: no BS 1363 or Schuko plug.
• It does not fit C19/C20 (16 A) inlets on large servers and high-power UPS units.
• It does not fit laptop adapters with C5 (cloverleaf) or C7 (figure-8) inlets.
• It offers no surge protection.