LevelOne VDS-1202 Ethernet over VDSL2 Converter Annex B 100/100 Mbps 2 km
Μάρκα:
LevelOne
VDS-1202
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
LevelOne VDS-1202 — Ethernet over VDSL2 Converter, Annex B
100 / 100 MbpsUp to 2 kmProfiles 17a / 30aAnnex B
The LevelOne VDS-1202 extends Ethernet networking over an existing single pair of copper telephone wiring using VDSL2. It supports VDSL2 profiles 17a and 30a with a maximum data rate of up to 100 Mbps downstream and 100 Mbps upstream, allowing network connections to reach far beyond normal Ethernet cabling distances without installing new Cat.5/6 infrastructure.
Compatibility — check before buying:
This exact VDS-1202 is the Annex B version. A complete point-to-point VDSL2 link requires compatible equipment at both ends, with one unit configured as the CO/Master side and the other as the CPE/Slave side. The quoted 100/100 Mbps figure is the maximum VDSL2 data rate; actual throughput and achievable distance depend on copper-wire length and quality. LevelOne specifies VDSL connectivity of up to 2 km.
Best For
✓ Extending Ethernet over existing telephone wiring
✓ Buildings where new Ethernet cabling is impractical
✓ Video, voice and data network links
✓ Long-distance point-to-point Ethernet extensions
Key Features
Ethernet over existing copper pair
VDSL2 technology carries Ethernet data over a traditional single pair of telephone-grade copper wiring, helping reuse existing building cabling where a new Ethernet run would be difficult or costly.
Up to 100/100 Mbps VDSL2
LevelOne specifies a maximum VDSL2 data rate of 100 Mbps downstream and 100 Mbps upstream. Available performance decreases as line length and copper-line impairment increase.
Configurable VDSL2 link
Four DIP switches provide configuration for CO/CPE operation, VDSL2 profile selection, Annex mode and SNR margin. Profiles 17a and 30a are supported, along with selectable Fast and Interleaved operation.
Two local Ethernet connections
Two 10/100 Mbps Ethernet LAN ports allow local network devices to connect to the converter, with dedicated LAN1 and LAN2 status indicators for link and activity monitoring.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The VDS-1202 is useful when an existing copper telephone pair already reaches the location where Ethernet is needed. Instead of treating the 2 km and 100/100 Mbps specifications as one guaranteed performance figure, consider them separately: 2 km is the supported VDSL connection reach, while 100/100 Mbps is the maximum data rate under suitable line conditions. For a new deployment, also verify the Annex requirement and remember that a point-to-point link needs compatible VDSL2 equipment at both ends.
Buyer’s Guide
Buy it if
You need to extend Ethernet over an existing copper telephone pair, require Annex B VDSL2 and need a link that can reach considerably farther than standard Ethernet cabling.
Check first
Confirm that Annex B is correct for the installation, inspect the available copper pair and make sure compatible VDSL2 equipment is available for both ends of the connection.
Performance tip
Shorter, cleaner copper runs provide better VDSL2 performance. The maximum 100/100 Mbps rate should not be interpreted as a guaranteed throughput figure at the maximum 2 km reach.
Χαρακτηριστικά
Product Code
04:309450
EAN Code
4015867209073
Manufacturer
LevelOne