LINDY 3m IEC C14 to C15 Power Extension Cable · Hot-Condition C15 · 10A 250V · H05VV-F 3G 1.0mm² · Black

The LINDY 30402 is a 3 metre IEC C14 to C15 mains extension cable with H05VV-F 3G 1.0mm² copper conductors, rated 10A at 250V AC, used to connect equipment with a C16 or C14 inlet to a PDU, UPS or other C13-style outlet.

The C15 end is the "hot condition" version of the familiar kettle-style connector: it has a notch that lets it mate with C16 inlets on equipment that runs hot, and LINDY rates it for temperatures up to 120 °C. That makes it the correct cable for broadcast gear, network equipment in hot racks, and any device whose manual asks for a C15 lead — and it still plugs into normal C14 inlets.

• 1 × LINDY 3m IEC C14 to IEC C15 power extension cable, black (30402)

• Use it between a rack PDU or UPS (C13 outlets) and a switch, server or AV device that has a C16 or C14 inlet.
• The C15 connector is the correct choice when a device specifies a hot-condition lead, where a standard C13 cable is not permitted.
• 1.0mm² copper conductors support the full 10A rating of the connectors.
• 3 m gives enough slack to route power between neighbouring racks or from a floor-standing UPS to a desk or cabinet.

• No wall plug: the C14 end fits only C13/C15 sockets such as PDUs, UPS outlets and power strips with IEC outlets.
• Not for C19/C20 16A equipment such as high-power servers and large UPS units; those need C19/C20 cables.
• A C15 connector will not fit a standard C13 appliance inlet in reverse — check you need C14/C16 at the device.
• The 10A limit applies; do not use it to feed a power strip that supplies more than 10A in total.