LogiLink WZ0038 Cage Nut Tool for Insertion and Removal, Adjustable for M6, 3/8" and 10 mm Cage Nuts, Aluminium
Μάρκα:
LogiLink
LogiLink WZ0038 Cage Nut Tool for Insertion and Removal, Adjustable for M6, 3/8" and 10 mm Cage Nuts, Aluminium
€9.76 inc. VAT
WZ0038
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
LogiLink WZ0038 — Cage Nut Tool for Fast, Safe Insertion and Removal
M6 · 3/8" · 10 mmInsert & removeAdjustableAluminium
The LogiLink WZ0038 is a plier-type cage nut tool for inserting and removing cage nuts in 19-inch and 17-inch cabinets, adjustable for M6, 3/8-inch and 10 mm cage nuts, made of aluminium.
Anyone who has pushed cage nuts in with a flat screwdriver knows the problem: the clip slips, the screwdriver scratches the rail and the nut ends up at the bottom of the cabinet — or in a finger. This tool grips the nut and pulls it into the square hole in one movement, and takes it out the same way. LogiLink designed it to lower the risk of injury and of damage to the cabinet compared with using a screwdriver.
Before you order: LogiLink lists M6, 3/8-inch and 10 mm cage nuts. Other cage nut types are not listed — if your rack uses a different size, send us the model before ordering.
What's in the Box
- 1 × LogiLink WZ0038 cage nut tool
What It Means in Practice
- Insert a full row of cage nuts in minutes, without screwdrivers slipping on the rail.
- Remove old or misplaced cage nuts without bending the clip or the rail.
- The adjusting screw sets the tool to the nut size you use.
- Small and light (75 × 45 × 14 mm, 25 g), so it lives in any rack toolkit.
What Will Not Work
- Cage nuts other than M6, 3/8-inch and 10 mm: these are the only sizes LogiLink lists.
- Round-hole or threaded rails: these use no cage nuts, so the tool is not needed.
- Clip nuts on thin panels or other fasteners: the tool is made for rack cage nuts.
Key Features
Insert and remove
One tool for both jobs, pulling the nut into the square hole and out again.
Adjustable
An adjusting screw sets the tool for M6, 3/8-inch or 10 mm nuts.
Safer than a screwdriver
Lower risk of injury and of scratching or bending the cabinet rails.
Aluminium body
Light, compact and made to last in a technician's kit.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
This is the tool you buy once and wonder how you managed without. Pair it with a pack of M6 cage nuts and screws and fitting new equipment becomes a two-minute job. Cage nut sets, screws and panels are in our rack accessories range.
✓ Buy it if you install or move rack equipment on square-hole rails with M6, 3/8-inch or 10 mm cage nuts.
✕ Skip it if your rack has round or threaded holes and uses no cage nuts.
→ Also consider the Intellinet 712194 M6 cage nut set (20 nuts, screws and washers) to go with the tool.
Not sure what nuts your rack uses? Send us the cabinet model and we will confirm the right tool and hardware.
Colour
silver
Χαρακτηριστικά
Product Code
04:288938
EAN Code
4052792051421
Manufacturer
LogiLink