LogiLink W02B40B 19" 2U Hinged Wall-Mount Bracket, Black
2UHinged236-400 mm adjustable12 kg static load
The LogiLink W02B40B is a 19-inch wall-mount bracket with 2U of mounting space, a hinged frame and a depth that adjusts from 236 to 400 mm, rated for a 12 kg static load and finished in black RAL 9005. It lets you mount a patch panel, a small switch or a cable manager directly on the wall without a cabinet.
Because the bracket swings open on its hinge, you can reach the back of the installed equipment for cabling and service. It folds flat for shipping and is a tidy, low-cost option for small offices, shops and technical rooms where a full cabinet is not needed.
Before you order: The 12 kg load is the total for everything mounted. The wall and anchors must also carry that weight plus the leverage of a hinged frame, so use fixings suited to your wall type.
What's in the Box
- 1 x LogiLink 19-inch 2U hinged wall-mount bracket, black
- 2 x M6 mounting sets
What It Means in Practice
- 2U is enough for a 24-port patch panel plus a 1U switch, or a single 2U device, within the 12 kg limit.
- The hinge gives rear access to cables and ports after installation.
- Depth adjusts from 236 to 400 mm to suit shallow patch panels or slightly deeper switches.
- Open design: equipment is not protected from dust or tampering as it would be in a lockable cabinet.
What Will Not Work
- Equipment heavier than 12 kg in total.
- Devices deeper than 400 mm.
- Locking or dust protection - it is an open bracket, not a cabinet.
- Wall fixing screws and anchors are not listed in the box - choose them to suit your wall.
Key Features
Hinged frame
Swings open for access to the rear of the equipment.
Adjustable depth
236 to 400 mm to match the equipment you mount.
Flat-pack
Foldable design, ships flat.
Technical Specifications
| Identification |
| Part Number |
W02B40B |
| EAN |
4052792051704 |
| Brand |
LogiLink |
| Product Type |
19-inch wall-mount bracket |
| Dimensions |
| Height |
2U |
| Dimensions (W x H x D) |
494 x 92 x 400 mm |
| Depth Range |
236-400 mm |
| Weight |
1.6 kg |
| Construction |
| Design |
Hinged, foldable |
| Colour |
Black, RAL 9005 |
| Maximum Static Load |
12 kg |
| Warranty |
| Warranty |
1-Year Warranty (Singular) |
| Manufacturer Term |
Manufacturer warranty terms are not published by LogiLink for this accessory - claims handled through Singular |
Frequently Asked Questions
Can I mount a switch and a patch panel?
Yes, a 1U switch and a 1U patch panel fit in the 2U space, as long as their combined weight stays within 12 kg.
Are wall plugs and screws included?
LogiLink lists the bracket and two M6 mounting sets (for the equipment). Wall fixings are not listed - choose them for your wall type.
Why a hinged bracket?
You can swing the equipment out from the wall to reach cables and ports at the back.
Singular Expert Insight · Buyer's Guide
For a handful of ports on a wall, a hinged 2U bracket is often all you need - and much cheaper and lighter than a wall cabinet. Keep an eye on the 12 kg limit and use proper wall anchors. For wall cabinets, shelves and cable managers, see our
rack accessories.
✓ Buy it if you need to mount a patch panel and small switch on a wall with rear access.
✕ Skip it if you need a lockable, dust-protected enclosure or more than 12 kg capacity.
→ Also consider A small 19-inch wall cabinet if equipment needs protection or locking.
Not sure it will carry your equipment? Send us the models and we will check weight and depth before you order.