AG Neovo LMA-02 Extendable Wall Mount Bracket 32-65 inch 50kg VESA 600x400 120 Degree Swivel Tilt Black
Brand:
AG neovo
AG Neovo LMA-02 Extendable Wall Mount Bracket 32-65 inch 50kg VESA 600x400 120 Degree Swivel Tilt Black
€136.9 inc. VAT
LMA0201100000
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
AG Neovo LMA-02 — Extendable Wall Mount Bracket, 32-65", 50 kg
Extends 64 mm to 510 mm120° Total SwivelTilt -20° to +10°32" to 65" · up to 50 kg
The AG Neovo LMA-02 is an extendable wall mount bracket — an articulating cantilever arm for a single display of 32 to 65 inches weighing up to 50 kg. Folded back it sits 64 mm from the wall; swung out it reaches 510 mm, and it swivels 60 degrees to either side for 120 degrees in total and tilts from minus 20 to plus 10 degrees. That combination is what separates it from a flat wall plate: the screen can be pulled away from the wall and turned towards a desk, a bed, a counter or the other side of a room, then pushed flat when it is not in use. VESA patterns of 200 x 200, 300 x 300, 400 x 200, 400 x 400 and 600 x 400 mm are supported. It is a complete mount requiring no companion parts, built in steel in a black finish, weighing 7 kg.
Compatibility — check before buying:
Check your display’s VESA pattern and weight before ordering. AG Neovo lists the supported patterns explicitly as 200 x 200, 300 x 300, 400 x 200, 400 x 400 and 600 x 400 mm, with 600 x 400 mm the maximum and 200 x 200 mm the smallest pattern named. Some resellers advertise a minimum of 100 x 200 mm; that figure is not published by AG Neovo, so if your display uses a small pattern, confirm fit with us before ordering. The load limit is 50 kg — note that this is specific to the LMA-02, and the 80 kg and 100 kg figures from other AG Neovo mounts are not applicable here.
An extending arm loads a wall very differently from a flat plate. At full 510 mm extension a 50 kg display exerts substantial leverage on the fixings. AG Neovo publishes no itemised box contents, no screw or wall anchor specification, no approved wall types, and no TUV, GS or UL load certification for this bracket, and it does not publish assembled dimensions either — only the packing carton size. Treat it as a solid wall product, have it fitted by a competent installer who will specify the fixings for the actual substrate, and do not fix it to plasterboard or a stud wall without proper engineering. If you need certified load figures for a specification or tender, this product does not supply them.
An extending arm loads a wall very differently from a flat plate. At full 510 mm extension a 50 kg display exerts substantial leverage on the fixings. AG Neovo publishes no itemised box contents, no screw or wall anchor specification, no approved wall types, and no TUV, GS or UL load certification for this bracket, and it does not publish assembled dimensions either — only the packing carton size. Treat it as a solid wall product, have it fitted by a competent installer who will specify the fixings for the actual substrate, and do not fix it to plasterboard or a stud wall without proper engineering. If you need certified load figures for a specification or tender, this product does not supply them.
Best For
✓ Rooms where a screen has to be viewed from more than one position — kitchens, bedrooms, waiting areas, bars and restaurants
✓ Reception desks and counters where the display is turned towards a visitor and then pushed back flat
✓ Corner or side-wall mounting, where the swivel brings the screen square to the viewer
✓ Displays of 32 to 65 inches up to 50 kg with VESA patterns up to 600 x 400 mm
✓ Installations needing rear access to ports without unmounting the screen
Key Features
Extends from 64 mm to 510 mm
Closed, the bracket holds the display 64 mm from the wall, which is close to what a plain tilting plate gives you. Opened, it reaches 510 mm. That is the whole argument for an articulating arm: it costs you nothing in appearance when folded, and gives almost half a metre of reach when you need it — to angle the screen towards a different seat, or simply to get behind it and change a cable.
120 degrees of swivel
Sixty degrees to each side. In practice this is what makes a screen usable in a room with more than one viewing position, or on a side wall where a fixed panel would always be seen at an angle. It also lets a display at a reception counter be turned towards a visitor and then returned flat.
Tilt from -20 to +10 degrees
Thirty degrees of total tilt range, biased downwards, which suits a screen mounted above eye level — over a counter, in a waiting area or high on a kitchen wall. Tilting down also kills reflections from ceiling lights, which is usually the real reason a wall-mounted screen looks poor.
32 to 65 inches at up to 50 kg
The 50 kg limit covers most consumer televisions and many commercial panels in the supported size range, with VESA patterns from 200 x 200 up to 600 x 400 mm. It is a complete mount — no separate bracket, bar or adapter is needed.
Steel construction
AG Neovo specifies the bracket as steel in a black finish, weighing 7 kg. For an arm that has to hold 50 kg cantilevered half a metre off a wall, that mass is doing real work.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
An extending arm is a different proposition from a flat wall plate, and it is worth being clear about when the extra cost and the extra wall load are justified. The case for the LMA-02 is a room with more than one place to sit. A fixed panel is optimised for exactly one viewing position and looks progressively worse from every other; 120 degrees of swivel and half a metre of reach turn that into a screen that works from the sofa, the kitchen island or the desk on the other side of the room. The second real use is service access. Anyone who has tried to reach an HDMI port behind a 55 inch screen bolted flat to a wall knows why an arm that swings out is worth having.
The specification is honest and unusually complete for this family. AG Neovo publishes the full list of supported VESA patterns rather than just a maximum, gives both extremes of the extension range, and states swivel and tilt in degrees — all things that other products in its accessory range leave vague. The 50 kg limit is generous for 32 to 65 inches and covers most televisions and a good number of commercial panels. Note that it is 50 kg and not the 80 or 100 kg that AG Neovo’s video wall and large-format plates carry; those figures do drift onto listings across this brand and should not be assumed here.
The gap, and it is the same gap across every AG Neovo mount we have looked at, is installation data. There is no itemised box contents list, no screw or wall anchor specification, no statement of approved wall substrates, and no TUV, GS or UL load certification anywhere in the documentation. AG Neovo does not even publish assembled dimensions for this bracket — only the carton. For a flat plate that matters less. For an arm holding 50 kg at 510 mm, the moment on the fixings is several times what the same display would apply folded flat, and that is precisely the case where you want to know what the manufacturer expects of the wall. Our advice is to treat it as a solid wall product, have the fixings specified for the actual substrate by a competent installer, and not to fix it to plasterboard or a stud partition without proper engineering. If a tender requires certified load figures, this product will not satisfy it.
On availability the LMA-02 is in good shape: the datasheet dates from December 2020, making it one of the more recently maintained parts in AG Neovo’s accessory range, and European distribution is holding stock.
The specification is honest and unusually complete for this family. AG Neovo publishes the full list of supported VESA patterns rather than just a maximum, gives both extremes of the extension range, and states swivel and tilt in degrees — all things that other products in its accessory range leave vague. The 50 kg limit is generous for 32 to 65 inches and covers most televisions and a good number of commercial panels. Note that it is 50 kg and not the 80 or 100 kg that AG Neovo’s video wall and large-format plates carry; those figures do drift onto listings across this brand and should not be assumed here.
The gap, and it is the same gap across every AG Neovo mount we have looked at, is installation data. There is no itemised box contents list, no screw or wall anchor specification, no statement of approved wall substrates, and no TUV, GS or UL load certification anywhere in the documentation. AG Neovo does not even publish assembled dimensions for this bracket — only the carton. For a flat plate that matters less. For an arm holding 50 kg at 510 mm, the moment on the fixings is several times what the same display would apply folded flat, and that is precisely the case where you want to know what the manufacturer expects of the wall. Our advice is to treat it as a solid wall product, have the fixings specified for the actual substrate by a competent installer, and not to fix it to plasterboard or a stud partition without proper engineering. If a tender requires certified load figures, this product will not satisfy it.
On availability the LMA-02 is in good shape: the datasheet dates from December 2020, making it one of the more recently maintained parts in AG Neovo’s accessory range, and European distribution is holding stock.
Buyer’s Guide
Buy it if
Buy the LMA-02 when a 32 to 65 inch display up to 50 kg has to be seen from more than one position, or when you want to be able to reach the back of the screen without taking it off the wall. Check the weight and VESA pattern against the 50 kg and 600 x 400 mm limits first, and plan the wall fixings around a solid substrate — an arm at full extension is a far greater load on the wall than a flat plate. If you only ever view the screen from one seat, a fixed or tilting mount will sit closer to the wall and cost less.
Skip it if
Your display is heavier than 50 kg or uses a VESA pattern above 600 x 400 mm, you only ever view the screen from one position — a fixed or tilting plate will sit closer to the wall and cost less — or you are fixing to plasterboard or a stud wall. Also skip it if you need published load certification for a specification or tender.
Also consider
The AG Neovo LMK-03 is a low-profile tilting wall plate for much larger and heavier displays — VESA 75 x 150 up to 800 x 500 mm and 100 kg — with a safety lock and anti-theft lock, sitting 75 mm from the wall. The LMK-01 covers 42 to 86 inch displays at 80 kg. For multi-screen installations, the VWM-01 and VWM-02 video wall mounts take 42 to 65 inch panels up to 80 kg. Browse the full range of monitor mounts and stands, or see the commercial monitors suited to signage and meeting room use.
Features - AG neovo - LMA0201100000
Colour
black
Monitor mount capacity
Single monitor mount
More Details
Product Code
CB04354
EAN Code
4710739597004
Manufacturer
AG neovo