Origin Storage 651687-001 HP Original 2.5 Inch SFF Hot-Plug Drive Carrier Tray for ProLiant DL380 Gen8 Gen9
Μάρκα:
Origin Storage
Origin Storage 651687-001 HP Original 2.5 Inch SFF Hot-Plug Drive Carrier Tray for ProLiant DL380 Gen8 Gen9
€37.34 inc. VAT
651687-001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
651687-001 — HP Original 2.5″ SFF Hot-Plug Drive Carrier
HP original part2.5″ SFF hot-plugProLiant DL380 Gen8 / Gen9Carrier only, no drive
This is the 2.5-inch small-form-factor hot-plug drive carrier used in HP ProLiant servers — the metal-and-plastic tray with the front latch and the status light pipes that a drive is screwed into before it goes into a hot-plug bay. It is supplied by Origin Storage as an HP original part under HP part number 651687-001, listed for the ProLiant DL380 Gen8 and Gen9. HPE’s own parts database describes 651687-001 as an SFF SATA carrier assembly. Buy it when a server has empty hot-plug bays and no spare carriers, or when a carrier has been lost or damaged — a bare drive cannot be pushed into a ProLiant bay without one.
Compatibility — check before buying:
This is a carrier, not a blank and not a drive. A blanking piece fills an empty bay and cannot hold a disk; this tray holds a disk. The HP blank kit is a different part number entirely, so check which one you actually need. On interface: HPE’s own parts description for 651687-001 reads SFF SATA, while resellers commonly market this carrier as SAS/SATA — we publish what HPE publishes and nothing more, so if your drives are SAS, send us the drive part number and the server model and we will confirm the correct carrier with the distributor first. On server compatibility: HPE does not publish a compatible-server list for this part number, and its parts database returns no where-used information; what we can state is the supplier’s own listing, ProLiant DL380 Gen8 and Gen9, and that the SmartCarrier SFF design HP introduced with Gen8 continued across later ProLiant SFF hot-plug bays. Give us your exact server model and generation and we will check before you order. Mounting screws are not documented as supplied.
Best For
✓ Filling empty 2.5-inch hot-plug bays in a ProLiant DL380 Gen8 or Gen9
✓ Adding drives to a server that shipped part-populated
✓ Replacing a carrier lost or broken during a rack move
✓ Preparing drives offline so a swap takes seconds
✓ Keeping a spare carrier with a cold-spare disk
✓ Standardising on HP original parts in a supported server
Key Features
The part that makes a bay usable
A ProLiant SFF hot-plug bay will not accept a bare drive. The carrier is what holds it, guides it onto the backplane connector and latches it in place, and it is also what carries the drive status and activity indicators to the front of the chassis through its light pipes. Without one, the bay is decoration.
HP original, not a look-alike
The tray is supplied as an HP original part rather than a generic copy. That matters at the front panel: latch geometry, light-pipe alignment and backplane depth are what separate a carrier that seats cleanly from one that fouls the cage door or leaves the LEDs dark. It is listed for the ProLiant DL380 Gen8 and Gen9.
One carrier per drive is the point
Servers are populated over years, and carriers are the part nobody orders until the disks arrive. Keeping a carrier with each cold spare means a failed drive is replaced in the time it takes to walk to the rack, rather than after a two-day wait for a tray. That is the whole reason this part number sells.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Carriers are the quiet bottleneck in server upgrades. A server bought half-populated arrives with exactly as many carriers as it has drives, and the empty bays are unusable until trays turn up — which is why the sensible practice is to order a carrier with every cold spare rather than after a failure. The two things worth pinning down before you buy are the server generation and the drive interface, because HPE does not publish a compatibility list for this part number and we would rather check with the distributor than have you return a tray. Send us the model and the drive part number. For the drives themselves, our enterprise SSDs and enterprise HDDs ranges cover the 2.5-inch models these bays are built around.
Buyer’s Guide
Buy it if
You have a ProLiant DL380 Gen8 or Gen9 with empty 2.5-inch hot-plug bays, you want an HP original carrier rather than a copy, and you have confirmed the drive interface with us.
Skip it if
You need a blank to close an empty bay — that is a different part. You expected a drive in the box. Or your server is a different model or generation and the fit has not been checked.
Also consider
A 2.5-inch SFF drive to go with it, or an HP drive blank kit if the goal is to close an unused bay for airflow rather than to add storage.
Χαρακτηριστικά
Product Code
CG95709
EAN Code
5059902030962
Manufacturer
Origin Storage