Kopp PROFIversal 691698K 19" 1U UPS Power Strip, 8 x Red Schuko CEE 7/3, IEC C14 Input, 10 A Fuse, Grey RAL 7035

The Kopp PROFIversal 691698K is a 19-inch, 1U power strip with eight Schuko (CEE 7/3) sockets, made for use behind a UPS: it is fed through a 2 m cable with an IEC C14 plug and protected by an integrated 10 A fuse. The red sockets mark the outlets as UPS-backed, so nobody plugs a kettle or a heater into the protected circuit by mistake.

The housing is an aluminium profile in light grey (RAL 7035, the classic rack colour), the socket inserts are turned 45° for angled plugs, and metal mounting brackets are included. It is distributed by EFB-Elektronik.

• 1 x Kopp PROFIversal 691698K 19" socket strip with fixed 2 m grey supply cable (IEC C14 plug)
• Metal 19" mounting brackets
• Screws and cage nuts not listed — use the ones supplied with your rack

• Turns one C13 output of a UPS into eight Schuko sockets, so Schuko-plugged devices can run on UPS power without adapters.
• Red sockets make the UPS-backed circuit obvious to anyone working on the rack.
• 10 A in total is about 2300 W at 230 V and must also fit within the rating of the UPS outlet.
• No switch: the strip follows the UPS output.

• Plugging straight into a wall socket — the C14 input needs a C13 outlet on a UPS or PDU.
• BS 1363 (UK/Cyprus) plugs — use CEE 7/4 or CEE 7/7 cords.
• Loads above 10 A — the integrated fuse will blow.
• Surge protection or a switch — this strip has neither.