Rittal DK 7240.200 19" 1U Socket Strip, 12 × IEC C13 Outlets, 16 A, Aluminium Duct, 2 m Cable Without Plug

The Rittal DK 7240.200 is a 19-inch 1U socket strip with twelve IEC C13 outlets in an anodised aluminium duct, rated 16 A at 250 V — for server and network racks where equipment uses C14 power cords.

Twelve outlets in one rack unit is a dense layout for switches, servers and storage. It mounts with two swivelling brackets; the 2 m H05VV-F 3G1.5 cable ends in wire ferrules, without a plug.

• 1 × Rittal DK socket strip with 2 m connection cable (no plug)
• 2 × mounting brackets
• Assembly parts

• The H05VV-F 3G1.5, wire-end ferrules, no plug cable has three 1.5 mm² cores including earth — the normal cross-section for a 16 A household lead, so it does not run warm at normal office loads.
• 16 A shared across twelve outlets: plan the total load, not per outlet.
• C13 outlets take the same short C14–C13 jumper cords used on UPS and PDUs, keeping rack cabling tidy.

• Surge or lightning protection — this 19" socket strip has none. For a PC, NAS, TV or router choose a surge-protected strip or a UPS.
• Outdoor, bathroom or damp-room use — it is rated IP20, dry indoor rooms only.
• Plugging straight into a wall socket — there is no plug.
• Devices with Schuko or UK plugs — use 7240.220 (7 × Schuko) or C14 jumper cords.
• Switching — there is no switch.