Jabra GN1200 CC Universal Headset Cord, QD to RJ9, Coiled 2 m, 8-Position Wiring Switch for Most Desk Phones

The Jabra GN1200 CC (part 88011-99) is a universal bottom cord that connects any corded Jabra Quick Disconnect (QD) headset to the RJ9 headset or handset port of most desk phones, including IP hard phones. It is the coiled version, 2 m long.

Instead of buying a different cord for every phone brand, the GN1200 has an 8-position slide that switches the wiring scheme: you simply move the slide until you hear a dial tone. A built-in low-current microphone amplifier (11.5 dB nominal gain) is used on phones that need an amplified mic. Jabra lists the GN1200 as the replacement for the older GN cords 8800-00-01, -03, -20, -25 and -37.

• Jabra GN1200 CC universal cord, QD to RJ9 (part 88011-99)
• Headset not included

• One stock item fits mixed phone fleets: the slide covers standard wiring plus Cisco 79xx, Avaya, Nortel, Panasonic, NEC and Ascom/Philips variants.
• Set-up: plug into the phone, set the slide to 1 and move it position by position until you hear a dial tone.
• Works with all corded Jabra QD headsets, so existing BIZ and GN headsets can move to a new phone without a new cord.
• The coiled 2 m cord gives freedom to lean back or stand while staying tidy on the desk.

• USB headsets, softphones and mobiles — Jabra marks the GN1200 as deskphone-only.
• Phones without an RJ9 headset or handset modular port (e.g. 2.5 mm or 3.5 mm headset jacks).
• Remote call answering with wireless headsets — that needs an EHS adapter or DHSG cable.
• Non-Jabra quick disconnect headsets (e.g. Poly QD).