StarTech.com SFP1000LXST MSA Uncoded SFP Transceiver 1000BASE-LX 1310 nm LC Single-Mode up to 10 km DDM
Μάρκα:
StarTech.com
StarTech.com SFP1000LXST MSA Uncoded SFP Transceiver 1000BASE-LX 1310 nm LC Single-Mode up to 10 km DDM
€77.72 inc. VAT
SFP1000LXST
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
StarTech.com SFP1000LXST — Uncoded 1G LX SFP, 10 km
1 Gbps1000BASE-LXSingle-mode 10 kmMSA uncoded
The StarTech.com SFP1000LXST is a Gigabit SFP transceiver for single-mode fibre, reaching up to 10 km at 1310 nm over an LC duplex connection, with digital diagnostics. It is MSA compliant and uncoded, so it suits switches that accept standard optics — Ubiquiti, D-Link, NETGEAR, Supermicro and TP-Link among them — for links between buildings, floors and sites. In practice, single-mode optics are the choice when a link leaves the building or runs several hundred metres: the OS2 fibre used by carriers and campus backbones carries the signal for kilometres with little loss. Before you order, confirm the fibre is single-mode at both ends and note the length and the number of patch panels on the way.
Compatibility — check before buying:
The module is uncoded. Switches that insist on their own brand of optics — many Cisco, HPE Aruba and Juniper models — may reject it; StarTech.com sells coded versions such as the Cisco-coded SFPG1320C and the HPE-coded J4859CST. It needs single-mode fibre and a port that runs 1G. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your device model and the cable run and we check it before you order.
Best For
✓ 1G links between buildings
✓ Ubiquiti, NETGEAR and TP-Link switches
✓ Supermicro and D-Link fibre ports
✓ Single-mode runs up to 10 km
✓ Media converters with SFP slots
✓ Spare optics for mixed networks
Key Features
Uncoded MSA optic
A standard 1000BASE-LX module without vendor coding, for switches that accept third-party optics.
Single-mode fibre, long reach
Built for single-mode (OS1/OS2) fibre, the type used between buildings, floors and sites. It will not run over the orange or aqua multimode fibre found in many racks — the fibre type has to match at both ends.
Monitoring you can read
Digital diagnostics (DDM) let the host report temperature, laser power and received light, so a dirty connector or a failing link shows up before users call.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The SFP1000LXST is the 1G single-mode optic we suggest for switches that accept standard MSA modules — Ubiquiti, NETGEAR, TP-Link and similar. If the switch is a Cisco or HPE model that checks optics, choose the coded SFPG1320C or J4859CST instead; for runs beyond 10 km, the SFP1000EXST reaches 40 km. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status and we help you find out whether it is the module, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You need a 1G single-mode link up to 10 km on a switch that accepts uncoded MSA optics.
Skip it if
Your switch only accepts its own brand of optics, the fibre is multimode, or the run is longer than 10 km.
Also consider
StarTech.com SFP1000EXST for 40 km, or SFPG1320C for Cisco.
Port Spped
- 1 Gbps
Χαρακτηριστικά
Product Code
V934146
EAN Code
0065030873420
Manufacturer
StarTech.com