Bring EU Wi-Fi 7 mesh coverage outdoors
EU BE3600 dual-band2×2.5G WAN/LANIP65 enclosure802.3at PoE or AC power
The TP-Link Deco BE25-Outdoor EU one-pack adds a weather-resistant mesh node for outdoor or indoor placement. Its dual-band Wi-Fi7 radio is rated up to2882Mbps on5GHz and688Mbps on2.4GHz, with two2.5Gbps autosensing WAN/LAN ports. Power it from a suitable802.3at PoE source or the supplied AC power cord, and use the wall/pole mounting kit where appropriate.
Best For: Extending a compatible Deco network towards a garden, terrace or outdoor work area with suitable cabling and installation.
Before you order: This is one EU BE3600 unit, not the US BE5000 version or a multi-unit kit. It has2.4/5GHz wireless and no6GHz band. IP65 requires upright installation with the waterproof cover and cable seals secured; it does not permit immersion. The supplied Ethernet cable is for indoor use only. A PoE source is separate, and installation must follow the regional radio and electrical instructions.
What's in the Box
- 1× Deco BE25-Outdoor EU unit.
- 1× AC power cord,1× RJ45 Ethernet cable, wall/pole mounting kit and installation guide.
- The included Ethernet cable is indoor-only. An802.3at PoE switch/injector, outdoor-rated cabling, ISP modem and additional Deco nodes are not listed as included.
What It Means in Practice
- Use the Deco app on a compatible iOS or Android device for setup and network management.
- Select router mode or access-point mode to suit the existing modem/router arrangement.
- Supply power through an802.3at PoE source providing at least19.5W, or through the AC input using the supplied cord and a suitable protected socket.
- Have an instructed/skilled installer mount the unit upright and secure the waterproof cover, cable seals and unused openings.
- Use appropriate outdoor Ethernet cable and follow the guide for socket protection, cable shielding/grounding and permitted regional outdoor radio settings.
- Place the node where it has a usable wired or wireless backhaul; mesh cannot create bandwidth where the upstream signal is weak.
What Will Not Work
- Not a6GHz tri-band router and not a US BE5000 radio specification.
- The Ethernet ports accept PoE power; no PoE output for powering a camera is claimed.
- IP65 is not immersion protection or unconditional lightning immunity.
- Headline wireless rates are combined PHY values, not guaranteed Internet or single-client throughput.
- Advanced HomeShield functions may require a paid subscription, and Wi-Fi7 features require compatible clients and firmware.
Key Features
Outdoor placement
IP65 enclosure and specified−30°C to60°C operation support correct outdoor installation.
Multi-gigabit wired links
Two autosensing2.5G WAN/LAN ports support suitable backhaul or connected devices; only one WAN port is used at a time.
Flexible power
Choose802.3at PoE input or100–240V AC, according to the installation.
Deco mesh integration
Works with compatible Deco models and supports router/AP operation with app management.
Technical Specifications
| Exact SKU / pack |
Deco BE25-Outdoor(1-pack)(EU), one unit |
| Wireless class |
BE3600 dual-band Wi-Fi7 |
| 5GHz /2.4GHz PHY |
Up to2882Mbps /688Mbps |
| Wireless bands |
2.4GHz and5GHz; no6GHz |
| Ethernet |
2×2.5Gbps autosensing WAN/LAN; only one WAN at a time |
| Power input |
IEEE802.3at PoE or100–240V AC50/60Hz0.5A |
| PoE source requirement |
At least19.5W per user guide; source supplied separately |
| Maximum power consumption |
19W EU datasheet |
| Operation modes |
Router / Access Point |
| Mesh / roaming |
Deco mesh,802.11k/v/r; client support required |
| Wi-Fi7 features |
MLO,4K-QAM,Multi-RU; compatible clients/firmware required |
| Security |
WPA/WPA2/WPA3; client support applies |
| Address protocols |
IPv4 andIPv6 |
| WAN types |
Dynamic IP,Static IP,PPPoE,L2TP,PPTP |
| Antennas |
2dual-band plus2horizontal-polarization2.4GHz antennas |
| Enclosure / mounting |
IP65 when properly installed; upright wall/pole/tabletop placement |
| Dimensions W×D×H |
110×121.3×215.5mm |
| Operating temperature |
−30°C to60°C |
| Storage temperature |
−40°C to70°C |
| Operating humidity |
10–90%RH |
| Management |
Deco app; HomeShield basic/advanced functions vary |
| Condition / catalog EAN |
New /1210002600835 |
Frequently Asked Questions
Is this the5Gbps US model?
No. This EU version is BE3600: up to2882Mbps on5GHz plus688Mbps on2.4GHz.
Does it power a PoE camera?
PoE is an input power option for the Deco. PoE output is not specified.
Is the supplied Ethernet cable outdoor-rated?
No. The manufacturer guide explicitly identifies the supplied cable as indoor-only. Use suitable cabling for outdoor runs.
Can I leave the base cover open?
No. Secure the waterproof cover and cable seals, close unused openings and mount upright as instructed.
Can I add it to my existing Deco?
The manufacturer supports combining Deco models. Available features and performance depend on the complete network and client devices.
Singular Expert Insight
Plan power, backhaul and sealing together. PoE can simplify an outdoor cable run, but it needs a suitable source and outdoor cabling. AC operation avoids a PoE source but requires the appropriate protected mains connection. A well-placed node with sound backhaul matters more than the advertised aggregate wireless number.
Buyer’s Guide
✓ Buy it if You need one EU Wi-Fi7 Deco node for a correctly installed outdoor mesh extension with2.5G ports.
✕ Skip it if You require6GHz, a multi-unit kit, PoE output or guaranteed coverage without a site assessment.
→ Also consider Existing Deco compatibility, ISP equipment, PoE budget or protected AC power, outdoor cabling, mounting location and backhaul.