TRENDnet TEG-MGBS40 SFP Mini-GBIC Transceiver Gigabit 1000BASE-LX 1310 nm LC Single-Mode up to 40 km
Μάρκα:
Trendnet
TRENDnet TEG-MGBS40 SFP Mini-GBIC Transceiver Gigabit 1000BASE-LX 1310 nm LC Single-Mode up to 40 km
€54.57 inc. VAT
TEG-MGBS40
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
TRENDnet TEG-MGBS40 — Gigabit Single-Mode SFP, 40 km
1 Gbps1310 nmSingle-modeUp to 40 km
The TRENDnet TEG-MGBS40 is a Gigabit SFP transceiver for single-mode fibre, reaching up to 40 km at 1310 nm over a duplex LC connection. Built to the SFP MSA, it links buildings, campuses and sites that are further apart than a standard 10 km LX module can cover. In practice, single-mode optics are the choice when a link leaves the building or runs several hundred metres: the OS2 fibre used by carriers and campus backbones carries the signal for kilometres with little loss. Before you order, confirm the fibre is single-mode at both ends and note the length and the number of patch panels on the way.
Compatibility — check before buying:
It runs at 1310 nm; the 80 km TEG-MGBS80 uses 1550 nm, so the two will not link to each other — use the same model at both ends. It needs single-mode fibre and a 1G SFP port. Keep the dust cap on until you connect the fibre, and clean both connector ends before every mating — dirt is the most common cause of a link that will not come up. Not sure? Send us your device model and the cable run and we check it before you order.
Best For
✓ Gigabit links between sites
✓ Campus backbones beyond 10 km
✓ Single-mode runs up to 40 km
✓ Rural and industrial-park links
✓ Replacing a failed 40 km module
✓ Switches with 1G SFP ports
Key Features
40 km at Gigabit
A 1310 nm optic that carries Gigabit Ethernet up to 40 km over single-mode fibre.
Single-mode fibre, long reach
Built for single-mode (OS1/OS2) fibre, the type used between buildings, floors and sites. It will not run over the orange or aqua multimode fibre found in many racks — the fibre type has to match at both ends.
Hot-swappable
Modules plug into a live port without shutting the switch down, so a link can be added or replaced during working hours. Seat it until it clicks and use the latch to remove it.
Plan both ends together
A link only comes up when both ends use the same standard, speed and media. Order the far-end module, the cable and any spares in one go and the link works on day one.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
We suggest the TEG-MGBS40 when a Gigabit link runs past the 10 km of a standard LX module but stays within 40 km. Order both ends as the same model. Every order is backed by Singular’s local support in Cyprus — if a link will not come up, send us the port status and we help you find out whether it is the module, the cable or the configuration. Browse all transceivers and DAC cables or the switches they plug into.
Buyer’s Guide
Buy it if
You need a Gigabit single-mode link of 10–40 km.
Skip it if
The run is over 40 km (TEG-MGBS80), the fibre is multimode, or you need 10G.
Also consider
TRENDnet TEG-MGBS80 for runs up to 80 km.
Χαρακτηριστικά
Product Code
04:190302
EAN Code
0710931501940
Manufacturer
Trendnet