TRENDnet TI-G62 6-Port Hardened Industrial Gigabit DIN-Rail Switch, Unmanaged, 5x RJ45 + 2x SFP (1 Shared), 12-56V DC
Brand:
Trendnet
TRENDnet TI-G62 6-Port Hardened Industrial Gigabit DIN-Rail Switch, Unmanaged, 5x RJ45 + 2x SFP (1 Shared), 12-56V DC
€164.45 inc. VAT
TI-G62
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
TRENDnet TI-G62 — 6-Port Hardened Industrial Gigabit DIN-Rail Switch
Unmanaged · plug and play5x Gigabit RJ45 + 2x SFP (1 shared)12-56V DC dual inputs-40 to 75°C · IP30 metal
The TRENDnet TI-G62 is a hardened, unmanaged Gigabit switch for DIN-rail or wall mounting, with five 10/100/1000 RJ45 ports and two SFP slots — one dedicated and one shared with RJ45 port 5 — for control cabinets, factory floors, traffic and outdoor enclosures where an office switch would not survive.
It runs from any 12-56V DC supply on two redundant inputs, works from -40 to 75°C in an IP30 metal case and needs no configuration: wire the power, plug in the cables and it switches. An alarm relay closes when a power input fails, so a PLC or alarm panel can report it. This page describes the TI-G62 hardware version 1 as listed by our distributor; TRENDnet's newer version 2 adds a seventh, fully independent port.
Before you order: No power supply is included. You need a 12-56V DC source — typically a DIN-rail PSU such as the TRENDnet TI-M6024 (24V, 60W) — wired to the removable terminal block.
What's in the Box
- TI-G62 industrial switch
- Removable 6-pin power terminal block
- DIN-rail and wall mount kit
- Quick Installation Guide
What It Means in Practice
- Five copper Gigabit ports for PLCs, HMIs, IP cameras or panel PCs, plus fibre uplinks to reach a distant control room or another cabinet.
- Port 5 is a combo: use either its RJ45 jack or the shared SFP slot, not both. With both SFP slots in use you have 4 copper + 2 fibre ports.
- Two DC inputs (e.g. two PSUs, or PSU + battery) keep the switch running if one source fails; the relay output signals the failure.
- Unmanaged means no VLANs, no QoS and no ring redundancy — if you need those, look at a managed industrial model.
What Will Not Work
- No PoE — it will not power cameras or access points; choose a PoE+ model such as the TI-PG62B for that.
- It cannot be powered from mains (230V AC) directly; a DC supply is required.
- No management: no VLAN, ERPS/RSTP ring, IGMP snooping, SNMP or web interface.
- Port 5 RJ45 and the shared SFP cannot be used at the same time.
- SFP modules are not included.
Key Features
Hardened for the field
IP30 metal housing, -40 to 75°C operation, shock, freefall and vibration tested, with a grounding point against surges.
Redundant DC power
12-56V DC on dual inputs with overload current protection and an alarm relay output for power failure.
Copper + fibre
5x Gigabit RJ45 and 2x SFP slots (1 dedicated, 1 shared) for 100/1000 fibre uplinks.
Zero configuration
Unmanaged plug-and-play switching with 12 Gbps capacity and 9KB jumbo frames.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight · Buyer's Guide
The TI-G62 is the simplest way to put Gigabit copper and fibre into a DIN-rail cabinet without touching a configuration screen. It suits machine networks, CCTV backbones with non-PoE cameras and remote cabinets fed by fibre. If your cameras need power from the switch, move to a PoE+ model; for loop protection or VLANs, move to a managed one. Browse our industrial and office switches to compare.
✓ Buy it if you need a rugged unmanaged switch with fibre uplinks on DC power.
✕ Skip it if you need PoE, VLANs or ring redundancy, or you have only AC mains in the cabinet.
→ Also consider TRENDnet TI-PG62B (4x PoE+ with 2x SFP) or a managed industrial switch such as the TI-G642i.
Not sure it fits your setup? Send us the model of your rack, switch or device and we will check compatibility before you order.
Features - Trendnet - TI-G62
Standard
5-Port
Port Speed
- 1 Gbps
More Details
Product Code
04:190435
EAN Code
0710931160345
Manufacturer
Trendnet