Ubiquiti Entry Sensor, White Door and Window Contact Sensor
Ubiquiti Entry Sensor for Doors and Windows
The Ubiquiti USL-Entry is a single white door and window contact sensor with a separate magnet. Its reed switch monitors open/closed status over proprietary SuperLink; a SuperLink Gateway and UniFi Protect system are required separately. This is not a lock, camera, motion detector or glass-break sensor.
What's in the Box
- One Entry Sensor
- One magnet
- One 3 V CR123A lithium battery
- Adhesive mounting pads
- Two M3 screws
- Two wall plugs
- Opening tool
- Alignment template
What It Means in Practice
- The guide's alignment template specifies a 5–30 mm gap between sensor and magnet; align them correctly and ensure they do not obstruct door or window movement.
- Choose adhesive or screw mounting for the sensor and magnet, using the supplied mounting items.
- The sensor reports open/closed status through proprietary SuperLink, so plan for a separately purchased SuperLink Gateway and UniFi Protect host/system.
- The stated 2 km SuperLink range depends on deployment and is not a guaranteed indoor range; battery life is up to 6 years under conditions, not a fixed replacement interval.
What Will Not Work
- Requires a separately purchased SuperLink Gateway and UniFi Protect host/system.
- No direct Wi-Fi, Ethernet or Bluetooth connection is claimed.
- No standalone audible alarm, lock actuation, camera, motion detection or glass-break sensing is included or claimed.
- Operating conditions: 0–40 °C and 10–90% non-condensing humidity.
- The EU and US operating-frequency entries are distinct regional specifications, not a universal selectable range.
Key Features
Technical Specifications
Frequently Asked Questions
It provides straightforward door/window contact monitoring in a single-sensor set, with adhesive or screw mounting and the CR123A battery included. Its key requirement is a separately purchased SuperLink Gateway and UniFi Protect system.