Ubiquiti UniFi Switch Pro XG 24 USW-Pro-XG-24 Layer 3 Managed 16x 10GbE 8x 2.5GbE 2x 25G SFP28 1U Rack
Μάρκα:
Ubiquiti
Ubiquiti UniFi Switch Pro XG 24 USW-Pro-XG-24 Layer 3 Managed 16x 10GbE 8x 2.5GbE 2x 25G SFP28 1U Rack
€1587.76 inc. VAT
USW-PRO-XG-24
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Ubiquiti UniFi Switch Pro XG 24 — Layer 3, 16× 10GbE + 8× 2.5GbE + 2× 25G
16× 10GbE + 8× 2.5GbE RJ452× 25G SFP28 uplinksLayer 3, 460 GbpsNo PoE — see the PoE model
The Ubiquiti UniFi Switch Pro XG 24, model USW-Pro-XG-24, is a professional-grade 1U Layer 3 Etherlighting switch. Read the port count carefully, because the name is misleading: it has 24 RJ45 ports in total, but only 16 of them are 10GbE — the other 8 are 2.5GbE. Uplinks are 2× 25G SFP28, not 10G SFP+. Ubiquiti rates it at 460 Gbps switching capacity, 230 Gbps non-blocking throughput and 342 Mpps forwarding, with a 32,000-entry MAC table, an 8 MB packet buffer and support for 1,000 VLANs. Its Layer 3 credentials are genuine and named by Ubiquiti: DHCP server, DHCP relay, inter-VLAN routing and 512 static IPv4 routes. There is a 1.3-inch touchscreen on the front, and the switch draws a maximum of 150 W from its internal 200 W power supply. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
Three things to confirm before ordering. First, this model has no PoE at all — not on any port. PoE belongs to the separate USW-Pro-XG-24-PoE, which has the same ports but adds a 720 W budget. Some reseller listings title the non-PoE SKU with “720W”; that figure belongs to the other model. Second, it is not a 24×10G switch: 16 ports are 10GbE and 8 are 2.5GbE. If you need 24 ports of full 10GbE, the model you want is the USW-EnterpriseXG-24. Third, it requires a UniFi Network application to configure — a UniFi console such as a Cloud Key or Dream Machine, or a self-hosted UniFi Network server running version 9.0.114 or later. Ubiquiti publishes no standalone web interface, so this is not a switch you can set up on its own. Note also that the uplinks are SFP28: they run 25G, 10G or 1G, so 25G optics are needed to reach full speed.
Best For
✓ Core or distribution switching in a UniFi network
✓ Sites moving from 1G to a mixed 10G and 2.5G access layer
✓ Feeding 25G uplinks to an aggregation switch or server
✓ Wi-Fi 7 deployments where access points need 2.5G or better
✓ Networks that need real inter-VLAN routing at the switch
✓ Existing UniFi installations with a console already in place
Key Features
Sixteen 10GbE ports plus eight 2.5GbE
The 16 10GbE RJ45 ports autonegotiate down through 5G, 2.5G, 1G, 100M and 10M, and the 8 additional RJ45 ports run at 2.5GbE. That mix is the point of the model: full 10G where you need it, multi-gig where 10G would be wasted, in one 1U chassis.
25G SFP28 uplinks
Two SFP28 cages run at 25G, 10G or 1G. That is a genuine step above the 10G SFP+ uplinks found on most 24-port switches, and it means the switch can feed an aggregation layer or a server without the uplink becoming the bottleneck. Total switching capacity is 460 Gbps with 342 Mpps forwarding.
Layer 3 that Ubiquiti actually specifies
Not a marketing L2+ badge: Ubiquiti names DHCP server for local networks, DHCP relay, inter-VLAN routing and 512 static IPv4 routes. Alongside them sit the Layer 2 essentials — LACP aggregation, STP and RSTP, IGMP snooping, 802.1X control, DHCP snooping and guarding, storm control, port mirroring, jumbo frames and LLDP-MED.
Etherlighting, a touchscreen and RPS support
Every Ethernet and SFP28 port is Etherlighting, so link state and speed are visible at a glance from the rack. A 1.3-inch touchscreen on the front gives local status, and a USP RPS DC input allows a redundant power supply to be added separately alongside the internal 200 W unit.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
Ubiquiti’s naming does this switch no favours. “XG” used to mean 10G throughout — it still does on the EnterpriseXG — but on the Pro XG line it signals a mixed 10G and 2.5G design, and the 24 in the name is the total RJ45 count rather than the 10G count. Once you know that, the design makes sense: 16 ports of 10G for servers, uplinks and high-throughput clients, 8 ports of 2.5G for Wi-Fi 7 access points and multi-gig endpoints, and two 25G SFP28 cages so the uplink is not the bottleneck. The Layer 3 claim is real and specified rather than a distributor’s embellishment. Two practical caveats: it needs a UniFi console to manage, which is an extra purchase if you are not already in the ecosystem, and Ubiquiti does not publish fan or noise data, so treat it as a rack-room switch rather than an office-corner one. Browse the rest of our switches and bridges, or our access points if the 2.5G ports are destined for Wi-Fi.
Buyer’s Guide
Buy it if
You run a UniFi network and want a 1U Layer 3 switch that mixes 16 ports of 10GbE with 8 of 2.5GbE and adds 25G SFP28 uplinks, with 460 Gbps of switching capacity and real inter-VLAN routing.
Skip it if
You need PoE — take the USW-Pro-XG-24-PoE instead — or you need 24 ports of full 10GbE, in which case the USW-EnterpriseXG-24 is the model. Also skip it if you do not run a UniFi console, since there is no standalone web UI.
Also consider
USW-Pro-XG-24-PoE for the same switch with a 720 W PoE+++ budget, USW-EnterpriseXG-24 for 24 ports of full 10GbE, or USW-Pro-Aggregation if you need an all-fibre 28× 10G SFP+ plus 4× 25G SFP28 aggregation switch.
Colour
black
Standard
24-Port
Port Spped
- 2.5 Gbps,
- 10 Gbps,
- 25 Gbps
Χαρακτηριστικά
Product Code
03:281212
EAN Code
0810177160779
Manufacturer
Ubiquiti