Ubiquiti UniFi Premium Patch Cable Outdoor 12 m, White, Cat6a
Ubiquiti UniFi Premium Outdoor Cat6a Cable, 12 m
The Ubiquiti UniFi Premium Patch Cable Outdoor is a single 12 m white Cat6a Ethernet patch cable with two shielded male RJ45 plugs. Its insulated weatherproof TPE jacket and outdoor rating suit outdoor network runs; supported data rate is up to 10 GbE, subject to the connected equipment and installation.
What's in the Box
- One white 12 m pre-terminated cable with two shielded male RJ45 plugs and frosted protective boots
What It Means in Practice
- Allow for a minimum 31 mm bend radius when routing the 12 m cable; do not use the shorter-variant 28 mm figure.
- The 3.9 mm jacket diameter and 32 AWG stranded copper specification apply to the 12–15 m length group.
- For outdoor installation and operation, the stated temperature range is -20 to 60°C; storage is -40 to 85°C.
- PoE passthrough is supported up to PoE+++ with suitable equipment, but the cable includes no power source and does not guarantee a particular delivered wattage.
What Will Not Work
- No PoE power source, switch, endpoint equipment, SFP, fibre or active repeater is included.
- The source does not establish sealed connector/IP protection or direct-burial suitability.
- Speed and PoE performance depend on endpoints and installation; no universal delivered wattage is specified.
Key Features
Technical Specifications
Frequently Asked Questions
The practical distinction is the 12 m outdoor variant: it has a 3.9 mm jacket, 32 AWG stranded copper and a 31 mm minimum bend radius. These are the confirmed specifications for this length group, not the thinner-cable figures for shorter variants.
Buyer’s Guide
Features - Ubiquiti - UACC-Cable-P-Outdoor-C6A-12M-W
- 10 Gbps