Ultron save-E LED Bulb E27 10W Non-Dimmable, 810 lm, 3000K Warm White, 60W Equivalent, 25,000 h Lifetime

The Ultron save-E E27 10W (138075) is a non-dimmable LED bulb that replaces a 60 W incandescent in any standard E27 lamp holder, giving 810 lumens of 3000K warm white light for homes, offices, reception areas and hospitality spaces.

Ultron rates it for 25,000 hours and 15,000 switching cycles, and states an energy saving of more than 80% compared with the bulb it replaces. It is made for ordinary on/off switched circuits — the simplest and most cost-effective way to move a 60 W fitting to LED.

• 1 × Ultron save-E E27 10W non-dimmable LED bulb (138075)
• No dimmer, adapter or lamp holder is included — the bulb screws straight into an existing E27 socket

• A like-for-like swap for a classic 60 W bulb: 810 lm is the brightness people expect from 60 W, at one sixth of the power.
• 3000K warm white gives a soft, slightly yellow tone that suits living spaces, meeting rooms, hotels and restaurants; for workshops, stores or task lighting a 4000K neutral white is usually the better choice.
• At 25,000 hours the bulb lasts around 8.5 years at 8 hours a day, which cuts replacement trips in high ceilings and hard-to-reach fittings.
• The 130° beam spreads light widely, so it works well in pendants, table lamps and ceiling fittings with open shades.
• Because it runs at full brightness only, it is the right pick for corridors, stairwells, storage rooms and any fitting on a plain switch.

• It will not fit E14 (small screw), B22 (bayonet) or GU10 sockets — check the base of your current bulb first.
• It is not a smart bulb: there is no Wi-Fi, app or voice control.
• It cannot be dimmed — not with a wall dimmer, nor with a touch or smart dimmer module.
• Very compact or enclosed shades must take a bulb of 112 × 60 mm (length × diameter) — measure if space is tight.