Wantec 5720 2wIP E-Series Two-Wire Ethernet/PoE Switch-Side Adapter, Screw Terminals, 10/100Mbps, 65W PSU
Brand:
Wantec
Wantec 5720 2wIP E-Series Two-Wire Ethernet/PoE Switch-Side Adapter, Screw Terminals, 10/100Mbps, 65W PSU
€259.73 inc. VAT
5720
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Please sign in so that we can notify you about a reply
Wantec 5720 — Ethernet and PoE over Two Wires
Switch-side unit10/100MbpsScrew terminals65W PSU included
Reuse a suitable two-wire route for network data and power instead of treating this as an ordinary RJ45 repeater. The 5720 connects to the network switch and supplies the link from its included power adapter; a compatible receiver is needed at the device end.
Compatibility — check before buying:
At least one switch-side and one receiver adapter are required. The 5722 is the screw-terminal device-side partner shown in the exact guide and is separately required. Respect terminal polarity and check cable quality, wire size, length and endpoint PoE demand together.
Key Features
Two-wire installation
The two-pin terminal carries the link between adapters; the RJ45 connects this unit to the switch.
Power budget depends on the route
The manufacturer’s 600m reference is accompanied by much lower delivered power on long cable runs. Use the qualified reference points below for planning.
Join control
The guide provides pairing, link removal and reset timing. The receiver’s PoE on/off switch is a 5722 feature, rather than a control on this unit.
Technical Specifications
What's in the Box
1 × Wantec 5720 switch-side adapter
1 × 56V DC / 65W power adapter
Quick installation guide
What Will Not Work
A complete two-wire link using this adapter alone; the receiver is separately required.
Assuming 600m reach guarantees full PoE power or a 200Mbps RJ45 connection.
Frequently Asked Questions
Singular Expert Insight
Start with endpoint power consumption and the existing wire gauge, then check length. A long route can carry data while leaving too little power for the intended camera or access point; choose the receiver and power arrangement together. Browse IP cameras; check their PoE requirements
Buyer’s Guide
Buy it if
You have a suitable two-wire route and have verified the receiver, cable and endpoint power budget.
Skip it if
You need a complete paired kit, Gigabit Ethernet or guaranteed full PoE power at 600m.
Also consider
The separately required 5722 receiver and a shorter or lower-resistance route when endpoint power demand is higher.
Features - Wantec - 5720
Colour
black
Interface
- Ethernet
Port Speed
- 10/100 Mbps
More Details
Product Code
04:402694
EAN Code
4250367757208
Manufacturer
Wantec