Wera 1060 i/1062 i/6 Kraftform VDE Screwdriver Set 6 Piece 1000V Phillips and Slotted IEC 60900
Μάρκα:
Wera
Wera 1060 i/1062 i/6 Kraftform VDE Screwdriver Set 6 Piece 1000V Phillips and Slotted IEC 60900
€35.69 inc. VAT
05051575001
Delivery
Order Today...
Ships...
Delivery...
ℹ️ Large or fragile items (e.g. monitors) may require extra handling time. We'll keep you informed.
Payment options
Trusted Tech Choice
Buying Benefits
Verified
Competitive EU pricing
Delivered to Cyprus from EU stock
Local warranty support
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Wera 1060 i/1062 i/6 — six VDE screwdrivers, every one tested at 10,000 V
1,000 V AC ratedIndividually tested at 10,000 VIEC 609006 pieces, PH and slotted
The Wera 1060 i/1062 i/6 is a six-piece insulated screwdriver set for work on live electrical installations: two Phillips drivers from the 1062 i series in PH 1 and PH 2, and four slotted drivers from the 1060 i series in 2.5, 3.5, 4 and 5.5 mm. Every piece in the set is individually tested at 10,000 volts in accordance with IEC 60900, approving it for working at up to 1,000 volts. That is a per-tool test, not a type approval applied to a batch. The handles are the two-component Kraftform design with hard zones for speed and soft zones for torque transfer, and the blades carry Wera’s Black Point tip finish. Typically in stock with fast delivery across Cyprus.
Compatibility — check before buying:
All six pieces carry the same rating — there is no voltage tester or other lower-rated item mixed into this set, which is worth confirming because VDE sets from several makers do bundle a 150–250 V tester alongside 1,000 V tools. Wera cites IEC 60900 in its documentation; it does not print EN 60900, so we do not either. When comparing dimensions, note that Wera’s tables give blade length and handle length separately, and the handle figure (81 or 98 mm here) is often misread as an overall length. Insulated tools should be inspected before every use and taken out of service if the insulation is cut, cracked or damaged in any way.
Best For
✓ Electricians working on or near live installations
✓ Consumer units, distribution boards and panels
✓ Industrial control and machine maintenance
✓ Anyone required to use VDE-approved hand tools
Key Features
Every tool individually tested at 10,000 V
Wera tests each piece rather than certifying a type and sampling the batch, which is why the approval for 1,000 volt working carries weight. The set also carries GS testing according to Wera.
Two Phillips and four slotted
PH 1 and PH 2 from the 1062 i series, plus slotted blades in 0.4 x 2.5, 0.6 x 3.5, 0.8 x 4 and 1 x 5.5 mm from the 1060 i series. That spread covers terminal screws, panel fixings and switchgear in one box.
Full Kraftform handle
The insulated handle keeps Wera’s two-component design: hard zones let the hand slide when speed matters, soft zones grip when torque does. Over a day of terminal work that is the difference between comfortable and sore.
Blade lengths matched to the job
Blades run from 80 mm on the smallest slotted driver to 125 mm on the 5.5 mm, so you can reach into a deep enclosure with the larger sizes without carrying an oversized tool for small terminals.
Technical Specifications
Frequently Asked Questions
Singular Expert Insight
The number to look at on any VDE tool is not the 1,000 volt rating — every insulated screwdriver claims that — but how it was tested. Wera tests each piece at 10,000 volts individually, which is a meaningfully different proposition from type approval with batch sampling. The second thing to check is whether the set is homogeneous, and this one is: six tools, one rating, no bundled tester quietly rated at 250 volts. Whatever set you buy, treat insulation as a consumable: inspect before every use, and retire any tool with a nick or a crack rather than trusting it. Browse our range in Cable Tools & Testers, or the wider Cables section for installation materials.
Buyer’s Guide
Buy it if
You work on or near live installations and need VDE screwdrivers you can trust, with Phillips cross-head sizes, and you want every tool in the box to carry the same 1,000 volt approval.
Skip it if
Your cross-head fasteners are Pozidriv — take the 1060 i/1065 i/6 set instead — or you need a voltage tester, TORX profiles or hexagon drivers included.
Also consider
The Wera 1060 i/1065 i/6 set for Pozidriv instead of Phillips, a separate VDE voltage tester, or a larger VDE set if you also need hexagon and TORX profiles.
Χαρακτηριστικά
Product Code
04:518026
EAN Code
4013288222381
Manufacturer
Wera